OP-COM 2007, CAN BUS Interface OPEL cars, Diagnostic Scanner

be used!

The program can only be used with a special interface hardware.
A simple serial or USB port based standard interfaces (K, KKL, etc) cannot

IMPORTANT: 

Hungarian (a widespread, and beautiful language too )
English
German
Turkish
Romanian
French
Danish
Portuguese
Slovakian

OP-COM is currently available at the following languages:

software updates, which can be downloaded from the internet.

interface), the price of OP-COM is quite affordable. Not to mention the free

Compared to the TECH2, which is the dealers tool (with a 32 MB card+CANdi

available for CAN-BUS.

500kbps. This is the main reason, why only the USB port based interface is

awesome speed of the High-Speed CAN-BUS systems, which is currently

The speed of the communication over the USB-BUS is enough to handle the

COMPATIBILITY ISSUES, with serial to USB converters.

The diagnostic inteface is USB port based, so there will be NO

Zafira, Corsa-C, Meriva, Tigra-B
You can code SAB6, and SAB8 airbags with the software.

PASS.
You can also reset, and program the Service interval reminder on Astra-G,

ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-

central door locking, or alarm.
You can also reset, and program the following immobiliser related items:

With OP-COM, you can learn keys to immobiliser, and remote keys to the

you to find the failed components more easily.

You will get a feedback on the state of the activated output. This will helps

HSCAN  - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

PIN6-PIN14
PIN3-PIN11
PIN1

You can also run output tests on many controllers.

KWP-2000), and the newest CAN based control units are very fast!

during communication, while newer Multec, or Bosch units are faster (using

older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow,

sample rate is depends mostly on the communication protocol. For example,

capable of showing 8 measuring block parameter simultaneously. The

module, you can choose anything from the list on your own. The program is

The program shows you measuring block information on many control

window. 

From the fault codes window, you can go directly to the measuring blocks

You can print out, save, or copy the fault codes to any other application.

Intermittent)

Full fault code text description Full status information (Present, Not present,

codes will be shown with all available information:

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) Fault

works as a multiplexer, and selects the appropriate pin for communication.

Since Opel uses many pin in the OBD connector, the diagnostic interface

Electronic Climate Control, Body Control Unit, just to name a few examples.

Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster,

The program supports many control units, like Engine, Automatic

lets you to perform output test, and supports remote, and key programming.

The program lets you to read out and clear fault codes, shows you live data,

diagnostic, such as Vectra-C, Astra-H, Zafira-B.

It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic

try diagnostic scanner    to get through more products