TMPro diagnostic tool

KEY COPIER modules (62,63,64, 65) help you to copy
all of Philips/Megamos/Temic fixed keys (ID11,ID12,ID13,SAAB,ID33) and also
Philips ID41,ID42,ID44 VAG,ID45 and Texas 4C and 4D crypto keys.
NO NEED ANY SPECIAL PRECODED CHIPS,simply T5,PCF7935,JMA TPX1 and JMA TPX2.
JMA TPX1 you can reprogram many times, JMA TPX2 once locked cannot be reprogrammed.
In addition you can see vehicle PIN code for Renault ID33 keys (module 62),
Renault Megane/Scenic ID4D keys (module 65) and for Peugeot 206/406 ID45 keys (module 63).
IMPORTANT NOTE: Module 65 requires JMA TPX cloner for to work.
Sorry i do not sell TPX Cloner. You must contact with nearest JMA dealer.
UNLOCKER of locked ID48 chips.
After programming on vehicle,
most of ID48 keys become locked and cannot be used again on other vehicle.
Now with TMPro you can unlock them.
NOTE: not all ID48 chips can be unlocked,
try and if you have a luck you will get unlocked chip.
The ID48 unlocker is free function.
IDENTIFIES AND SHOWS data for all transponders on market -
ID11, ID12, ID13, SAAB, ID33, ID40, ID41, ID42, ID44, ID45, ID46, ID48, ID4C, ID4D, ID73, ID8C, ID8E
For Philips it shows to which car manifacturer it belongs -
VAG, Opel, Peugeot/Citroen, Renault(shows 4-digit PIN code), Mazda, Alfa Romeo, Honda, Volvo/Mitsubishi, Nissan etc.
For Opel ID40 it shows if chip is not locked or already programmed to car (locked).
For ID48 shows if is locked or not, there is possibility for unlocking.
For ID4D shows content of all pages and also if particular page is locked or not.
For BMW ID73 key and Hitag2 CAS keys reads mileage, stored in key.
Reading and identifying keys is free function.
SOLUTION for SAAB 9-3 and 9-5 vehicles 1998-2003.
When all the keys are lost, the only solution is to buy new very expencive TWICE unit from dealer.
NO MORE - using module 47 software prepares T5 chip, ready programmed to start vehicle.

Can be connected with TPX cloner for cloning 4D chips

ALL  NEW  style hardware .
Adding many mudle softwares for clone 4C , 4D , 44 , 45 and also including heavy bike key programming software .
 
TMPro2 gives more independence in locksmith`s job. Vehicles, which uses transponders in keys can be divided into 2 groups. First is which not use PIN code. Second is which use PIN code. For second group you have to order PIN code by chassis number, to pay and to wait for it. Sometimes supplied PIN code is not correct. Also for some vehicles you have to order precoded by chassis number keys. All this steps can be bypassed, if your immobiliser is supported by TMPro. For 80% of modules TMPro prepares from immobox eeprom dump ready to start car transponder and you do not need any futher operations. Just cut newkey, put written transponder in it and start car. For the rest 20% of modules software shows immobiliser PIN code and you have to match written transponder with car. You can use key programming devices such as AD100, DEC Superscan or similar.

ALL NEW style hardware .
Adding many mudle softwares for clone 4C , 4D , 44 , 45 and also including heavy bike key programmi