Software and Drivers CD
USB Cable
OP COM Interface
Package included
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
You will need the vehicle security code, which can be found on the CAR-PASS, Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B, code SAB6, and SAB8 airbags with the software.
You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
You will need the vehicle security code, which can be found on the CAR-PASS.
You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm.
You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
HSCAN- Dual-wire, High Speed CAN-BUS, 500 kbps
PIN1
PIN3-PIN11
PIN6-PIN14
You can also run output tests on many controllers.
The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
From the fault codes window, you can go directly to the measuring blocks window.
You can print out, save, or copy the fault codes to any other application.
Full status information (Present, Not present, Intermittent)
Full fault code text description
Fault codes will be shown with all available information:
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
OP-COM - PC based Opel diagnostic program
Payment Terms: | Western Union,paypal |
Port: | shenzhen |
Type:Diagnostic Kit Place of Origin:China (Mainland) Type:Other OP-COM - PC 2007 based Opel diagnostic OP-COM is a PC based diagnostic program. It covers almost all Opel cars, even new cars ...
Come From Yinuo (H.K.) Electronics Technology Ltd.
Model Number:OP-COM 2009 Brand Name:OP-COM 2009 Place of Origin:Guangdong China (Mainland) Type:Code Reader 2009 Opel op-com OP COM Diagnostic USB CAN OBD2 V1.33,OP-COM 2009 ...
Come From Jesse Trading Co., Ltd.