1. Home
  2. Automobiles & Motorcycles
  3. Vehicle Tools

BDM MPC555/6 tool

Product Details

The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100
Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car. Generally we use the easiest way of programming. So if a car can be programmed by the OBD port, we will do it this way.
After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chiptuning of ECUs with Motorola MPC555 - 565.
This generation of Motorola processors contain 448KB - 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. Therfore it is possible over the so called BDM interface, which must be implemented on every ECU board. For that purpose there are mostly 10 solder pads on the PCB.
Alternative there are ECUs with 12 or 14 solder pads, which can be supplied with operating voltage over these pads.
The BDM100 connects these solder pads of the BDM port with the WinOLS PC over the USB bus. The BDM100 gets its operating voltage from the USB bus. The ECU needs its own supply voltage of +12 volts.
The BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
The BDM100 requires the ECU to be open, on the bench, as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).
It allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).
The software allows to read and program the WHOLE ECU content of:
* 29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present);
* MOTOROLA MPC5xx Processor file;
* Serial Eprom content.

AVICY Trade Co.,Ltd

  • Country:Tanzania
  • telephone:255-000-5376254
The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This m

Send inquiry / quota request to BDM MPC555/6 tool

*Your name:
*Your Email:
*To:AVICY Trade Co.,Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Relate products of BDM MPC555/6 tool

BDM100 tool

Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car. Generally we use the easiest way of programming. So if a car can be programmed by the OBD port, we will do it this way. After the security entries for the OBD2 programming get ...

Come From Auto Diagnostic Tools

BDM100 diagnostic tool

BDM 100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential). BDM 100 requires the ECU to be open, "on the bench", as the ...

Come From autoboss

Can BDM CAS3 Programmer tool

Type:chip turnning Model Number:CAN and BDM CAS3 9S12 Programmer Brand Name:bdm cas3 9s12 CAN and BDM CAS3 9S12 Programmer PC version, work on any RS232 Com port. Function 9S12 can program HC12, 9S12, 9S12X CPU of M ...

Come From autokmfactory

Social Connect

  • mfrbee.com social network on weibo.com
  • mfrbee.com social network on twitter
  • mfrbee.com medium business blog

Ask / Review Mfrbee.com

Contact Us

  • contact mfrbee.com by email