Support 2008 Models
Support Saab 9-5 and Saab 9-3 CAN
Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B
You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.
With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm.
You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS.
You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
You can code SAB6, and SAB8 airbags with the software.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port
based interface is available for CAN-BUS.
From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter
simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while
newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
You can print out, save, or copy the fault codes to any other application.
The program supports many control units, such as
Engine
Automatic Transmission
ABS
Airbag
Engine Cooling module
Instrument Cluster
Electronic Climate Control
Body Control Unit
Many others..........
Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
OP-COM is a PC based Opel diagnostic program. This interface can read out and clear fault codes, shows you live data, lets you t |
PSACOM BlueTooth For Peugeot/Citroen can do key programming. PSA-COM Diagnostic Program with bluetooth. PSA-COM is diagnostic program for Peugeot/Citroen vehicles. PSACOM BlueTooth For Peugeot/Citroen PSA-COM Diagnostic Program PSACOM is diagnostic tool for Peugeot/Citroen, ...
Come From China CablesMall Technology Co.,LTD
auto diagnostic tool:OP-COM OP-COM(2008) ...
Come From Dioguardi Technology Co., Limited
Type:Code Scanner Place of Origin:Guangdong China (Mainland) Type:Code Reader Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B ! ...