volvo scanner tool

A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC's, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.

What are the system and computer requirements?

A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC's, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.

What are the system and computer requirements?

Now it works. Make sure the software can reliably access all the control modules that it should in your car.

Start the Volvo  program,

Turn the car's ignition switch ON. No need to start the engine.

Connect the interface between the computer and the car by plugging one end of the interface into a Serial (RS232) (or USB port ) on your PC and the other end directly into the OBD-II port present  passenger vehicles.

Run it and follow the prompts to allow it to install itself.
Note: You must install volvo FCR on your PC's hard disk -- it will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.

For laptops and PCs, download the shareware 1.3

How to Use?

Additional heater

Road traffic information

Alarm

Immobilizer

Climate control - air conditioning

Instruments, including service light reset

Driver and passenger seat memories

SRS - airbag and other protection systems

Automatic transmission

ABS

Engine - Petrol and Diesel

Volvo control module coverage includes :

Volvo FCR is a Windows-based Diagnostic Software for Volvo that emulates the functions of the dealers' very expensive proprietary scan tools. As the first aftermarket Volvo-Tool, it has the following features:

What is Volvo FCR?

Built-in, Electronic Protection from the "Aftermarket Radio Problem"

High quality UL certified Serial Cables (equivalent to CE)

LED light indicating communication status

Precision-molded diagnostic connector made to fit all volvo vehicles, even those with "tight" trim around diagnostic socket

Supports Volvo FCR version 1.3 or older

Product Features and Benifits:

This interface (adapter) is used as an interface and an Serial cable to connect a volvo vehicle to a PC for on-board diagnostics (OBD). It is fully compatible with the diagnostic software version 1.3 from Volvo FCR. Volvo FCR is a software program that turns your PC into a sophisticated Volvo diagnostic tool.

What can this interface be used for?

Volvo FCR Communication Interfaces to connect a Volvo Vehicle to a PC

OnBoardDiagnostics Versions: 1.3

Supported Software:

version Serial port design, supports the most chanllenging time-critical application like serial EEPROM programming

Works excellently volvo fault code reader 1.3 serial

New Design! 232 Chipset based design

Features:

900 series, S90 and V90

PC based code reader and live data scan tool for Volvo cars including 800 Series, C70, S40, V40, S70, V70,

S40 S70 S90 V40 V70 V90 C70

VOLVO Serial Diagnostic Cable

volvo scanner tool

volvo scanner tool
New Design! 232 Chipset based design