Opel OP-COM Diagnostic Interface

Software CD with installation instructions

USB Cable (Length 1.7M)

OP COM Interface

Package Contains

The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.

You can code SAB6, and SAB8 airbags with the software.

You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B

You will need the vehicle security code, which can be found on the CAR-PASS.

You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.

With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm.

You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.

The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

From the fault codes window, you can go directly to the measuring blocks window.

You can print out, save, or copy the fault codes to any other application.

Full status information (Present, Not present, Intermittent)

Full fault code text description

Fault codes will be shown with all available information:

SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps 

MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps

HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps

PIN1

PIN3-PIN11

PIN6-PIN14

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

Many others..........

Body Control Unit

Electronic Climate Control

Instrument Cluster

Engine Cooling module

Airbag

ABS

Automatic Transmission

Engine

Supported Control Units:

This interface lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

Covers 2008 models and Saab 95, Saab 93 CAN!

PC based Opel diagnostic program. Covers almost all Opel cars even new cars with CAN-BUS based diagnostic such as Vectra-C, Astra-H, Zafira-B!

PC based Opel diagnostic program. Covers almost all Opel cars even new cars with CAN-BUS based diagnostic such as Vectra-C, Astr