Intelligent tester II for Toyota
Product Details
DENSO Diagnostic Tester-2 (DST-2) for TOYOTA & LEXUS enables you to diagnose electronic control systems for engines, ABS's and airbags,even through CAN-diagnosis communication.
CAN Communication DiagnosisDST-2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional.
Easy operation on LCD display with touch panel5.7inch full color display with touch panel assists an easier operation.
Voltmeter and Oscilloscope Not only communication basis disgnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part.
Data recording to your PCSaved data such as data-list can be downloaded to your PC.
DST-2 Main Unit
Items Specification
Dimensions 145mm (W) x 223mm (H) x 71mm (D)
Weight Approx. 1380g
Source voltage DC10-32V
Power consumption Normal:7W (12VDC), Charging: 10W (12VDC)
Operation temperature 0~45C
Storage temperature -10~60C
LCD display 5.7-inch color STN (320x240), transparent type of 256 colors
Adjustable brigthness/contrast
Touch panel Input: by finger or stylus pen
Key Four (up, down, two function keys)
Built-in clock For a time stamp
PC Communication PC card slot CFx1ch (CF standard type I, II)
USB Host: 1ch, Function: 1ch
Serial 1ch (RS-232C)
Vehicle communication CAN, ISO9141
Back up power supply Lithium-ion battery 7.4v 1000mAH
Recharge hour (at normal temperature)
Approximate operating time Approx 5 hours (fully discharge to full charge)
80 minutes (normal operation)
Voltage Measurement Function
Items Specification
Maximum sampling rate 250s/sec
Input channel 1ch
Voltage range (vertical scale) 1V/div, 2V/div, 5V/div
Time range (horizontal scale) 100ms/div, 200ms/div, 10s/div
Oscilloscope Function
Items Specification
Maximum sampling rate 500ks/sec
Input channel 2ch
Trigger functions Mode Auto, normal, single
Trigger 10%, 50%, and 90% of the monitor
Voltage range (vertical scale) 100mV/div, 200mV/div, 500mV/div~10V/div
Time range (horizontal scale) 5us/div, 100us/div, 200us/div,~10s/div
(200ms and higher is the Roll mode)
- Country:Germany
- telephone:49-4272-322668
| DENSO Diagnostic Tester-2 (DST-2) for Toyota & LEXUS |
Send inquiry / quota request to Intelligent tester II for Toyota
Relate products of Intelligent tester II for Toyota
YG461E-II Air permeability tester $3,890.00/piece Min. order : 1 piece Scope: Air permeability tester is applicable to test various fabrics, including industrial fabric, non-woven fabric and any other materials,which have requests of air permeability. This machine is also ...
Come From Qinsuns Instruments Co., Ltd
Brief Introduction GDJJ-II Insulating Oil Dielectric Strength Tester is produced according to the National Standard GB-86 Determination Method for Dielectric Strength of Transformer Oil. The parameters are set in advance with the adjusting switch and then the instrument ...
Come From 重庆格纳迪设备有限公司
Application: The GD2571-II Digital Soil Resistance Tester /Portable Digital Soil Resistance Tester is applied to measure the earth resistance of equipments and conductive and resistance low resistance circuit in power system. Technical parameters of GD-2571-II Digital Soil ...
Come From 重庆格纳迪设备有限公司
Summary The instrument is specially designed and made as per standard of People's Republic of China GB/T510 Test Method for Solidifying Point of Petroleum Oils. It is suitable to determine the solidifying point at a temperature range: -20℃～+80℃. I. Main technical features ...
Come From 重庆格纳迪机电设备有限公司
Summary The instrument is specially designed and made as per standard of People's Republic of China GB/T510 Test Method for Solidifying Point of Petroleum Oils. It is suitable to determine the solidifying point at a temperature range: -20℃~+80℃. I. Main Technical Features ...
Come From 重庆格纳迪机电设备有限公司
A:Product Introduction: DSHD-510G-II Solidifying Point Tester is designed according the national standard of People's Republic of China GB/T510 Test Method for Solidifying Point of Petroleum Products. DSHD-510G-II Solidifying Point Tester is widely used in determining the ...
Come From Zhuhai Dshing Import&Export Co.,ltd
DSHP2002-II Vapor Pressure Tester for Petroleum Products(Reid Method) measuring vapor pressure of gasoline,volatility crude oil and other volatility oil products according to GB/T8017-87、ASTM D323…etc;but not suitable for measuring vapor pressure of liquefied petroleum gas. ...
DSHP1026-Ⅱ The density tester of petroleum product is applicable to the specification ASTM D1298. It test the standard density of crude petroleum, petroleum products and the mixture of petroleum products and non-petroleum products which are liquid in general at 20℃ in the ...
1. Summary： DSHP1017- copper etching tester for petroleum products is used to test the rotten Ⅱ degree of air oil,spraying fuel, car-used gas, burning gas, solvent oil, coal oil, diesel oil, cut fuel oil and other petroleum to brass in terms of GB/T5096、ISO2160、ASTM ...
According to GB/T8019-2008,ISO6246 and ASTMD381 standardTest Method for Gum Content in Fuels—By Jet Evaporation, this apparatus is applied to measure the level of existent gum of aviation gasoline, the gum of motor vehicle gasoline and other volatile distillates, including ...
