TOYOTA KEY PROG OBD tool

Otherwise you will take the above consequences.

This machine is only provided for the legal auto repair.

Dont try to open the cover of programmer and dash board

must use the right Toyota 4D chip, otherwise you take the consequences.

Notice:

the new ignition key will be confirmed by IMMO

Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out

Take out the key from ignition

Insert another new key for 5 seconds.

Insert the new key for 5 seconds.

Close all the car doors.

Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming

The new ignition key will be confirmed by the new IMMO.

Insert the vice-key to the ignition for 5 seconds.

Insert the other main key to the ignition for 5 seconds.

Insert the first new main key to the ignition for 5 seconds.

Close all the car door.

Matches 2 pcs main key and 1 pc vice-key to the IMMO computer  Notice: 2 new main key and 1 vice-key are needed to close the programming procedure

3,Take away the programmer from OBD.

2,Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the LED is on, as well as the anti-light SEC, which means the car is in the key programming state.

1,Turn the ignition on with the right 4D chip key.

The operating step as follows: ( read the using step and the importance notice carefully)

Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.

try key prog    to get through more products