motorbike

Cracks are visible on the surface area. This repair ensures that water is sealed from the pre stressed metal wires. Epoxy resin with E-glass woven fabrics are hand laminated over the cracks. click here to view gallery ?
 
Copyright ? 2007 Composite Evolution

Sealing of cracks:

Solid uni directional carbon fibre strips gets pre manufactured to the designed thickness and width. Woven carbon fibre fabrics are hand laminated with epoxy resin on the concrete surface. The laminates are then bonded on the laminated woven carbon fibre fabrics.

Bonding of pre-manufactured solid carbon fibre strips:

Repairs are done with all the different types of dry carbon fabrics applied on the concrete surface of the repair area. A vacuum bag is placed over the carbon fibre, and then the epoxy resin gets introduced under vacuum. This process guarantees minimal voids between the carbon fibre layers, and ensure good bonding on the concrete.

Vacuum resin infusion:

Different processes are available for structural carbon fibre repairs, and the sealing of cracks :

Pipe Rehabilitation

Parts get wrapped with dry carbon fabric material and are then laminated with epoxy resin. After this process, automotive 2K clear coat gets applied to a very high gloss finish. If no moulds are available, this process would be the economical option. We can wrap all kinds of shape and sizes. Broken parts can be repaired and then wrapped. The only disadvantage of this process is that we add weight to the existing part. click here to view gallery ?

Wrapping original metal or plastic parts with carbon fibre.

Customizing

Parts are manufactured from moulds with a hand wet lay-up and with a vacuum bag method. Not all parts get vacuum bagged, it all depends on the complexity of the part. This option also guarantees light weight structural parts. The same conditions for moulds are valid, as mentioned above. click here to view gallery ?

Manufacture parts from moulds with hand wet lay-up method with vacuum bag:

Parts are manufactured from moulds with a resin vacuum infusion method. This option guarantees light weight structural parts. Polyester resin moulds can be used but, the quality of these moulds are normally very bad. Preferably, moulds have to be made from epoxy resin. The moulds surface determines the quality of the parts surface.
If moulds are not available, we have the capability to manufacture high quality moulds.

Manufacture parts from moulds with vacuum resin infusion:

Different options of processes are available for composite parts:

Motorsport

Preferably, moulds have to be made from epoxy resin. The moulds surface determines the quality of the parts surface.