Truck, vehicle GPS/GSM positioning & tracking unit

    

     -- Manual

     -- Power kit

     -- GSM Ant.

     -- GPS Ant.

     -- Main unit

24.  Std. package:

       Accepts engineering redesign service for delicate application by vertical market

23.  Engineering change, design service

       Supports build up a fleet management back-end service platform in short period.

22.  Back-end system support

    

     -- watch-dog server monitoring program;

     -- Communication server loading simulation program

     -- Function test program, cable and keypad

     -- GCP (GPRS comm. program; for comm. server in back-end)

     -- Parameter setting program

     -- Communication protocol

21.  SKD tools

     -- others: sensors,

     -- Digital temperature sensor

     -- Multi-ports ComHub 

     -- Dispatch terminal

     -- PND (Personal Navigation Device)

     -- Moving sign, large LED display panel

     -- RFID reader; ticket validator

     -- Printer

     -- Bar code scanner

      (for data collection, data application)

20.  Available, connectivity to extended device

  

       area, red line.

       fencing function to alert driver when the vehicle drive in, drive out, closing the restricted 

       For security, management concern, firmware of the unit allowed to build in basic geo-

20.  Geo fencing function (option item)

       function on SMS, custom made version upon request.

       Basic SMS function available for IP, phone no., urgent message usage. For detailed 

19.  SMS function (option item)

      incoming call.

      Wire ear phone line to audio ports on I/O terminal for SPK, MIC funition when receive 

18.  Voice communication (option item)

     positioning data back to center when the vehicle suffered any crashing, collision event.

     available when the engine turn off. User can set the time of periodical send GPS 

     For security, on time alert concern, Option function of shocking detection, vibrate detection 

17.  Digital, shocking detection loop (option item)

     Flexibility to adds on an External battery pack.

     A rechargeable Li-ON battery module embedded inside of the unit.

16.  Build in rechargeable lithium battery (option item)

       Depending on the wiring of power and the ACC signal wires, the turn-off settings can be:

15.  Turn off settings

      battery.    

      Or, continue working after ACC off either counts on vehicles battery or an extra Li-on 

14.  Instant report engine turn off event or Delay shutdown the unit after  engine turning off

13.  5 user definable output dry ports for control

      parameters.

      Allowed to set high / low of voltage, duration seconds of mode change, open / close by 

12.  5 user definable input dry ports for trigger

       together with the positioning data will be uploaded automatically.

       It provides a single isolated interface port.  When it is grounded, an emergency message  

11.   Panic button

       extended device.

     * Option item: Multi-ports ComHub with 4 232 / 422 ports and 5V power outlets to link 

       transparent communication.

       This interface can be treated as an endless extension of the standard, physical RS232 for

       shaking modes. The transmission speed parameter allowed to change on-the-air.

       Defaults one asynchronous, serial interface, standard DB-9 male connector, non-hand 

10.  RS-232 port

    Through GPRS channel, allowed to upgrade, change parameters remotely.

9.  On-the air setting, remote modification

    Self-diagnosis, auto registration function executed after it turns on,

8.  Log-in registration

    unit for best protection.

    Multi-tasking CPU with 16MIPS speed. Its EEPROM stores ID and the parameters of the

7.  Advanced RISC Microcontroller

    available on request.  

    signal loss. Quality of flash memory up to 100,000 times write / erase.  4MB, 8MB version

    Defaults1 Mb flash memory to store the latest status, data (8000 records) prior GPRS 

6.  1 Mb Flash Memory included

    Max. 2¹⁶ unique ID. Provides ID auto checking function during each data transmission.

5.  Unique ID for each set

     GPRS or SMS channel on air.  

     Two sets of IP and Port burned and auto switchable. Default IP value changeable through 

4.  Two sets of IP and PORT provided

    & report status to back-end

    When turns on the unit, or under normal operation, the unit will auto-checking Ant. function  

3.  Auto. GPS antenna fail detection

     position, speedy position fix, low power consumption, and etc.

     With the latest SiRF or compete GPS chip that provides high sensitivity, accurate 

2.  GPS receiver module included

     Switching power source & surge protection, Suits for 12V or 24V batteries vehicle.

1.  Working Voltage: 10V ~ 35V

SLS-007SF is a GSM/ GPRS based on board unit for vehicle, truck, car positioning, fleet management application.  Meets GPRS Class 10 communication speed and provides all necessary interfaces and options for GPRS, SMS application domain.  Major features and specifications listed as below:

 

-Transparent 232; Voice, SMS (option)
-DI/O parameter setting
-SDK tools--easily build server
-Lots peripherals on request