54 channels bluetooth GPS receiver for PDA navigation(Model#PG-BTGP-38K)
Product Details
Description:
1. Summary
PG-BTGP-38K, a high-tech product combines the advanced Bluetooth technology and GPS technology. Through, Bluetooth technology, you can receive GPS data through intelligent mobile phone, PDA,
laptop and desktop for location and navigation.
2. Feature
1. Very low electricity cost and work up to maximum 15 hours
2. High-sense, good-performance GPS chip, receiving 54satellites simultaneously
3. Accord with Bluetooth 2.0 Specification CLASS 2
4. Support Bluetooth serial communication Profile (SPP Profile)
5. Compatible with li-battery and charger of Nokia mobile (e.g.N70)
6. 3 LED indicate statues of Bluetooth, GPS and recharging
7. Support the baud rate 9600bps in NMEA-0183 standard
8. Small-size, humanized design, portable, cute appearance
3. Technical Index
General Index
Receivable frequency L1, 1575.42MHz
C/A code 1.023MHz
Channel 54
Sensibility
Search -151dBm
Track -158dBm
Precision
Location 7m CEP 90%,3m CEP 50%(SA OFF)
Velocity 0.1m/s
Location time
Hot startup 1s, average
Warm startup 35s, average
Cold startup 40s, average
Dynamic condition
Altitude Max 10 km
Horizontal speed Max 515m/s
Acceleration Max 4g
GPS protocol
NMEA-0183 ASIC protocol
Default NMEA GGA, GSA, GSV and RMC, (VTG, GLL and RMS optional)
9600bps baud rate, 8 data bits, 1 stop bit, no check bit
Bluetooth index
Bluetooth code V2.0+EDR
Emission power Class 2 (4dBm max)
Receiving sensibility -80dBm
Communication distance 10m typical (free space)
Profile Communication Profile Serial Port Profile (SPP)
Power consumption
Working current about 60mA average
Working voltage 3.7V4.2V
Chargeable voltage 5.5V
Battery
Recharge time 2.5hrs typical
Working time about 15hr, track after the charging is full
Environment
Working temperature -40 to +85
Storage temperature -40 to +150
II Hardware Features
1. Size: 72.8(L) x45.8 (W) x18.8 (H) mm
Wight70g
2. Packing list
1. Main unit
1
2. Chargeable li-battery
1
3. Users manual
1
4. Home chargeror Car charger 1
3. Description
Power button Power jack
Blue LED, indicates the working status of Bluetooth
Green LED, indicating the working status of GPS
Red LED, indicating the working status of charging
4. LED status
|
LED
|
Status
|
Description
|
|
Green LED
|
Three second a flash
|
GPS position no fixed
|
|
One second a flash
|
GPS position fixed
|
|
|
Blue LED
|
Fast flash indicates
|
Bluetooth in stand-by mode
|
|
Slow flash indicates
|
Bluetooth in connection
|
|
|
Red LED
|
Constant on
|
Indicates: it is under charging
|
|
Off
|
Charging is completed
|
III Operation Instruction
1. Load battery
Open the cover of battery door, and load the battery in right direction. Close the battery door...
2. Charge
Plug the AC end of the charger into main power supply socket. Plug the DC charger into the hole on the product. Then, the red LED turns on, indicating it is charging. In about 2.5hr, red LED
turns off and the charger is completed.
Note: To maximize the lifetime of the battery, please charge it continuously for at least 10 hr for the first time.
3. Set up wireless connection
When power is on, the green LED turns on, indicating the state of location. Blue LED swiftly flashes, indicating that it enters to matching state. Now, you input search command on your
Bluetooth device (computer, PDA, mobile or laptop etc). When it is searched out, select BTGP-38K and then input the code0000, so that the matching is complete.
4. Test on computer
After the matching is completed, the computer will prompt that there is a serial port. Write down the number of it and open the test software in the CD. Select the said port and set the bit
rate at 9600bps. Click Open to open the serial port and then it will display the current locating data.
Serial port number, Bit rate, Serial port On/Off Satellite View
Data Command Scatter Received satellite signal S/N
IV Application
This product can send data relating to current location and movement information to the navigation software of intelligent mobile or PDA through Bluetooth technology and assists the navigation
software to navigate and track. For detailed operation, please see the instruction document of navigation software.
combines the advanced Bluetooth technology and GPS technology, 54 channels
- Model Number:PG-BTGP-38K
- Place of Origin:Guangdong China (Mainland)
- Function:Bluetooth-enabled
- Screen Size:7 inch
- Use:Hand Held
- Type:Gps Receiver
- Country:Hong Kong
- telephone:0086-755-83167391
| Delivery Time: | leadtime: 50pcs within 3 working days |
| Package: | gift box |
| Minimum Order Quantity: | 30 Piece/Pieces |
| Payment Terms: | T/T,Western Union |
| Port: | Shenzhen or Hongkong |
| Model Number: | PG-BTGP-38K |
| Place of Origin: | Guangdong China (Mainland) |
| Function: | Bluetooth-enabled |
| Screen Size: | 7 inch |
| Use: | Hand Held |
| Type: | Gps Receiver |
Send inquiry / quota request to 54 channels bluetooth GPS receiver for PDA navigation(Model#PG-BTGP-38K)
Relate products of 54 channels bluetooth GPS receiver for PDA navigation(Model#PG-BTGP-38K)
54 channel Bluetooth GPS Receiver NAVIGATION
Model Number:GPS54 Place of Origin:Guangdong China (Mainland) Function:Bluetooth-enabled Use:Automotive Type:Gps Receiver 54 channels "All-In-View" tracking ,Support A-GPS functionm ,Bluetooth version 2.0 compliant ,More than 14 hours of operation ...
Come From Shenzhen Tomtop Technology Co., Ltd.
