-This detail of below Do you have?
1).Cut off engine, fule supply,to stop the car by The decoder (main) and by phone
User can use any phone to remotely cut off the engine, fuel, etc.
The purpose of the decoder is to decode the dial tone into the GPS data and it can not perform the remotely cut off.
2).Anti hijack
Yes, you can track where the car located at real time when there is car hijack
3).Listening in
Yes, just press 8 from any phone and you can listen in (tapping)
4).Back up battery ,Power failure alarm minium 3-4 days
When the HI-603 power cut off, the tracker will send SMS for warning and it will last 8 hours (with the build in battery) when the power off.
5)Automatic report position/Vehicle's status,time,Longitude,Speed etc.
Yes, you can request and set up the tracker to send back the location via SMS in certain time interval
6).Emergency alert
By connecting the vibration sensor or other sensor, the tracker will send SMS for warning when there is movement.
By pressing the SOS panic button, the tracker will immediately send SOS for warning.
By set up the GeoFencing function, the tracker will send SMS when the car out of certain radius distance
For the decoder
1). 1pc main per 99 unit
Yes, you can track 99 cars with the same one decoder
2). include software work
Yes, each pakage will include a tracking software for tracking (only for one car)
To track more cars, you will need the auto re-dialer and software pakage.
3). support google map and local map
Yes, support both.
With the local map, you can track without internet but only track one car
4). 5 user's phone number
The tracker can send SMS warning to maximum 3 users phones
and you can recommed the software use with Hi 603 .
Any local mapping software, Tomtom, iGo, Auto Route, etc.