Silane KH-792(A-1120)

I.Introduction:
Chemical Name : N (beta-aminoethyl) gamma-aminopropytrimethoxy-silane
CAS NO. : 1760-24-3
Molecular Formula:NH2(CH2)2 NH(CH2)3Si(OCH3)3
Foreign Company's Trademark:
A-1120(America Union Carbon)
Z-6020(Dowcorning)
KBM-603(ShinEtsu)
GF9(Wacker)

silane KH-792 finds use as an :
Adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone tow-part urethanes and epoxy adhesives and sealants
Additive in phenolic and epoxy molding compounds
Additive to latex coatings, adhesives and sealants
Adhesion promoter in one-part silylated urethane adhesives and sealants based on organofuntional silane SPURSM Technology.

II.Features and Benefits:
Feature Benefit
Polyamino functionality Provides reactive site for amino-reactive resins.
Good wetting of substrates.
Trifunctional silane Excellent adhesion to inorganic substrates
such as metal, glass, etc.
Superior adhesion to plastics when employed
in SPUR Technology-based adhesives or
sealants.

III.Typical Physical Propertie:
Physical Form Clear liqui
Color, Pt-Co max 25
Specific Gravity at 20oC 1.010 1.030
Refractive Index at 20oC 1.4425 1.4460
Purity, % 97.0 min

IV.Applications
silane KH-792 may be used as an additive, eliminating the need for special primers in numerous bonding applications. Specific systems that demonstrate improved adhesion when
silane KH-792 is used are:
RTV Silicones and Hybrid Silane-Crosslinked Sealants
Silane KH-792 addition to one- and two-part silicone-crosslinked sealants improves adhesion to a variety of substrates, including glass, steel, aluminum and concrete. This silane can dramatically enhance adhesion to a wide array of plastics when used in combination with SPURSM Technology for silylating urethane polymers. (For formulation and silylated prepolymer preparation information, please refer to Literature bulletin #112-026-30, Silquest Organofunctional Silanes Crosslinkers and Adhesion promoters for Urethane Adhesives and Sealants.

Polysufide Sealants
When added to one- and two-part polysulfide sealants, silane KH-792 provides better adhesion to a variety of substrates, including glass, aluminum and steel. Silane KH-792 is typically used at a loading of 0.5 to 1.0 percent by weight to the sealant. It disperses well and produces cohesive failure in the sealant rather than adhesive failure of the bond between the sealant and the substrate.
Furthermore, the use of silane KH-792 can eliminate the need forprimers normally required to achieve adhesion to surfaces.

Plastisol Sealants
Adding silane KH-792(0.5 to 1.5 weight percent) as a replacement for polyaminoamide adhesion promoters in plastisol sealants improves bonding to metal substrates.
In addition to increased strength, the silane-modified plastisol sealant has better overall appearance than a system that uses polyaminoamide adhesion promoters. Silane KH-792-modified plastisol systems have a very light color, and the cured compound is bubble-free.
Additive in Phenolic and Epoxy Molding Compounds

Silane KH-792, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. This, in turn, leads to improved wet electrical properties, particularly at low frequencies. High-temperature strength properties are also improved.

V.Product Safety
When considering the use of any Nanjing USI products in a particular application, you should review our latest Material Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Material Safety Data Sheets and other product safety information, contact the Nanjing USI. Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use .

Silane KH-792(A-1120)

Chemical Name : N (beta-aminoethyl) gamma-aminopropytrimethoxy-silane
CAS NO. : 1760-24-3
Molecular Formula:NH2(CH2)2 NH(CH2)3