SELL ISONEM MS POLYMER (CONSTRUCTION CHEMICAL)

Color: All colors available.

Package: 20 kg plastic pail

Top coat application without thinning 500 g/m²  per one layer application.

Consumption : Primer (by addition of water; %20 ratio) 250 gr/m2

loose or weak particles . The product is ready to use but stirr well prior to application. Apply with brush, roller or spraying equipment in one or two layer after primer application. Recoating time period is max. 1 hour. Depending on application tools and conditions it can be diluted with water.

Substrate must be clean, uniform, dry, free of dust, oil or grease and

APPLICATION

It is easily applied on wet or damp surfaces in all weather conditions during summer, winter, quick drying for fast recoating  (1 hour) . The product provides color stability, ultraviolet resistance

• - Terraces, roofs and balconies
• - Wet area and foundation waterproofing
• - Factory and warehouse floors
• - Parking areas and walkways  
• - Flat or inclined roofs, terraces
• - All kinds of surfaces in bad conditions
• - Exterior sides
• - Metal roofs and wooden substrates
• - Surfaces previously coated with bitumen based waterproofing material
• - Asphalt and concrete surfaces
• It is open to pedestrian and vehicle traffic.
• It doesnt require any additional protective screed or concrete application

Uses

ISONEM MS POLYMER is a unique,  high quality pure polymer produced with latest technology. The product is ready to use, UV resistant, glossy and at hard elastic film structure, after curing it is open to pedestrian and vehicle traffic and has good resistance to chemicals. Easily applied on terraces, roofs , balconies,wet areas, industrial floors, concrete, screed, render, wooden substrates, metal surfaces, spray polyurethane foam heat insulation material applied surfaces, exterior walls and foundation walls. The product is also used as colored floor coating material on factory, storage, warehouses, parking areas, walkways and on asphalt base. Because of its quick drying time ( 10 minutes initial curing time and 30 minutes fully curing time and  1 hour recoating time for the second layer.) result is easy and quick application. The product is eco friendly because of its low consumption value and low price. It can be applied onto all types of substrates.  

ISONEM MS POLYMER TECHNOLOGY