Industrial 7-pin Micro SATA Flash (MSF)

Reliability
   Wear-leveling: Dynamic wear-leveling algorithms
   MTBF: > 3,000,000 hours
   ECC:Enhanced management 8-bits per 512bytes block
   Endurance:> 2,000,000 cycles logically contributed by dynamic wear-leveling and advanced bad sector management algorithms
   Data reliability: < 1 non-recoverable error in 1014 bits read
   Data retention: 10 years
   Physical specification
   Weight (max.): 20 g / 0.71 oz
   Dimension(W x L x H):
     - Length: 39.20 + 0.1 mm / 1.543 + 0.004 inch
     - Width: 20.50 + 0.1 mm / 0.807 / + 0.004 inch
     - Height: 8.0 + 0.1 mm / 0.314 + 0.004 inch
Warranty
    Industrial  grade: 5 years
   Standard grade: 3 years

Environmental specification
  Operating temperature: Industrial Grade -40 degree ~ 85 degree C
  Operating temperature: Standard grade 0 degree ~ 70 degree C
  Non-operating temperature: Industrial Grade -50 degree ~ 95 degree C
  Non-operating temperature: Standard grade -20 degree ~ 80 degree C
  Humidity: 10% ~ 95% non-condensing
  Acoustic Noise: 0dB
  Vibration: 15G compliance to MIL-STD -810F
  Shock: 1,500G compliance to MIL-STD -810F
  Altitude: 70,000 feet
 
Power consumption
    Power requirement:
    - 5V10% Build-in power pin-7(w/fuse)
    - 5V power input power cable (w/o fuse)
   Reading mode: 155 mA (Max.)
   Writing mode: 170 mA (Max.)
  Sleeping mode: 105 mA (Max.)

Performance
  Data transfer rate: Serial ATA standard Gen1(1.5Gbps)
  Sequential read: 24 MB/sec (64MB file test / 4GB mSATA)
  Sequential write: 14 MB/sec (64MB file test / 4GB mSATA)
  Average access time: 1.0ms (estimated / 4GB mSATA)

Specifications
  Compatibility: Serial ATA standard rev. 1.0a
  Flash Technology: SLC-NAND flash type based
  Form-factor: Compact-designing in vertical / leftward / rightward type
  Host Interface: Standard 7-pin SATA female connector

Features
  SLC-NAND flash type technology
  Form-factor support vertical, leftward and rightward
  Built-in ECC corrects up to 8-bit per 512-Byte
  Power request optional: Built-in power pin-7 (w/fuse) or 5V power input power cable (w/o fuse)
  Industrial grade capacity from 128MB up to 4GB
  Standard grade capacity from 128MB up to 8GB
  Performance up to 24MB/sec

For more information, please click here for detailed datasheet!

Industrial 7-pin Micro SATA Flash (MSF)
Aegis Series (TDK)
 
PSI/APRO's newly-released Industrial 7-pin Micro SATA Flash Disks (MSF),  Aegis Series (TDK) support Vertical, Leftward and Rightward