V44 Sm3 Series Wide-Temp Dom Flash Disk

Operation Endurance: Shock:1,000GVibration:15G

Operating Humidity: Relative Hummidity:8%~95%,non-condensing

Deposited Temperature: -55~+95

Operating Temperature: -40~+85(Wide Temperature)

Power Consumption: Active Mode:40mA Max  Sleep Mode:150uA Max

DC Input Requirement: DC +5V?10%   DC +3V?5%Optional

Data Storage: 10 Years

ECC: 4bit per page

MTBF: 5,000,000(@25)

Interface Data Transfe Rate: 40Mbytes/second(Typical)

Sustained Data Transfer Rate: Read:40Mbytes/second(Typical) ,Write:30Mbytes/second(Typical)

Encryption protection: No

Write/Read protection: No

Master/Slave Setup: Master/Slave(Optional) Default: Master

Sector Size: 512 Byes

Capacity : 16MB~8GB

Weight: 0.01Kg

Housing: Yes

Thickness: 6mm

Width: 50mm

Height: 26mm

Orientation: Vertical

IDE Connector: 44Pin

Model: DMV44-Dxxxx-SM-WT

Specification

The FlashOnDisk(FOD)is a kind of fast memory storage media which features high-efficiency and stability. It is the best resolution of memory storage medium among the present efficient cost. It enjoys various advantages over the traditional hard disks. As the control technology in conformance with the IDE/ATA industrial standard interface is adopted, no extra or patent software or amendment setting is needed, therefore, it is easier to operate and more flexible to function. FlashOnDisk will not only satisfy the increasingly growing information appliance market, but also is expected to play an important role in the development of information appliances. The FlashOnDisk can provide original, high-powered and reliable data storage, so it wont pose threat to data even working under the bad conditions such as harsh temperature, clash, shock or interference etc. It overcomes the deficiencies of mechanical hard disks and is widely used in such areas as industrial control, public safety, telecommunication, military industry, aviation etc., all of which have high reliable data. It is also widely used in the civil areas because of its small size, flexible storage space, low cost and the like. Unlike the mechanical hard disk, the FlashOnDisk can be turned on and off frequently without causing damage.DMA, i.e. direct memory access, means the computer peripherals (mainly referred to as hard disks) can exchange data with EMS directly so as to accelerate the reading and writing speed of hard disks and to enhance data transmission rate. The operating process goes like this: first right click my computer, select property, click and select the item of  hardware, click equipment manager and open it, then click the branch item of IDE ATA/ATAPI controller, select both channels of IDE controller ,i.e. the primary channel IDE" and the secondary channel IDE, then enter into property and advanced setting", when the dialog box displays the transmission mode of the devices connecting with the present IDE interface, check the menu of transmission mode, set all of them as DMA(if appropriate) and finally click ok.

The FlashOnDisk (FOD) is a kind of fast memory storage media which features high-efficiency and stability