Network Camera P-400
Product Details
|
Hardware
|
|
| System |
CPU: 32-Bit RISC Processor ROM: 4MB Flash ROM RAM 32MB SDRAM Watchdog: Chip to monitor system voltage tolerance and abnormal program execution |
| Connectors |
One RJ-45 connector for Ethernet (built-in Power-over-Ethernet (PoE) optional) One mini-DIN for RS-485/RS-232/GPIO/Video out RS-485: for external Pan/Tilt (PT) device control RS-232: for console connection GPIO: for one fully opto-isolated alarm input and one relay output Video out: for connecting to CCTV monitors, DVR, etc. One internal microphone One 12VDC jack One DC-Iris power connector Two LEDs to indicate network and power/system status Two wireless network antenna connectors (only available on the wireless model) |
| Image Sensor |
1/3 internal Sony CCD 0.15 Lux (F1.2) |
|
Video
|
|
| Lens |
Standard package: equipped with CS mount Focal Length (f)6.0mm F1.8 lens Supports Direct Drive lenses: built-in VR for DC level adjustment Optional: Focal Length (f)4.0mm, auto DC iris F1.2~64 lens Vari-focal lens (f)3.2~10mm, auto dc iris F1.4~360 lens |
| CCD Adjustment |
Backlight Control (BLC): on/off Electronic Shutter (ES/AES): on/off |
| Image Compression | MPEG-4 Simple Profile (SP); JPEG; MJPEG |
| Video Adjustment | Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence (I-Frame, I-Frame/P-Frame), Interlaced/Progressive Scanning |
| Video Bit Rate | 16K ~4M bits/sec (CBR/VBR configurable (high quality VBR settings for MJPEG can reach up to 10Mbps) |
| Resolutions |
Full D1 (4SIF): NTSC = 720x480; PAL = 720x576 SIF: NTSC = 352x240; PAL = 352x288 QSIF: NTSC = 176x 112; PAL = 176x144 |
|
Network
|
|
| Network Interface |
10/100 Base-T Ethernet IEEE 802.11g wireless LAN (optional) |
| Protocols | TCP(UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP, RTP/TCP(UDP) |
|
Operating Environment
|
|
| Operating Temperature | 0 |
