|
|
Specifications
|
Network Camera Hardware
|
|
System
|
CPU: 32-Bit RISC Processor
ROM: 4MB Flash ROM
RAM 32MB SDRAM
Watchdog: Chip to monitor system voltage tolerance and abnormal program execution
|
|
Connectors
|
One RJ-45 connector for Ethernet (built-in Power-over-Ethernet (PoE) optional)
One mini-DIN for RS-485/RS-232/GPIO/Video out
RS-485: for external Pan/Tilt (PT) device control
RS-232: for console connection
GPIO: for one fully opto-isolated alarm input and one relay output
Video out: for connecting to CCTV monitors, DVR, etc.
One internal microphone
One 12VDC jack
One DC-Iris power connector
Two LEDs to indicate network and power/system status
One 10M IR Illuminator
|
|
Image Sensor
|
1/3 interlaced color/monochrome Sony CCD (Day/Night)
Horizontal resolution: more than 520 TV lines
0 Lux (F1.2) (when used with IR Illuminator)
Fixed IR Cut Filter
|
|
Video
|
|
Lens
|
Standard package: equipped with Tamron CS mount Focal Length (f) 4mm F1.2~360 DC-Iris lens
|
|
CCD Adjustment
|
Backlight Control (BLC): on/off
Electronic Shutter (ES/AES): on/off
Day/Night (Color/Monochrome): on/off (below 5 Lux = mono, above 8 Lux = color)
|
|
Image Compression
|
MPEG-4 Simple Profile (SP); JPEG; MJPEG
|
|
Video Adjustment
|
Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence
(I-Frame, I-Frame/P-Frame), Interlaced/Progressive Scanning
|
|
Video Bit Rate
|
16K ~4M bits/sec (CBR/VBR configurable (high quality VBR settings for MJPEG can reach up to 10Mbps)
|
|
Resolutions
|
Full D1 (4SIF): NTSC = 720x480; PAL = 720x576
SIF: NTSC = 352x240; PAL = 352x288
QSIF: NTSC = 176x 112; PAL = 176x144
|
|
Network
|
|
Network Interface
|
10/100 Base-T Ethernet
|
|
Protocols
|
TCP(UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP, RTP/TCP(UDP)
|
|
Operating Environment
|
|
Operating Temperature
|
0
|
|
