Band Saw Leveler

Made in USA
Rugged North American components are designed for the larger saws used on American and Canadian bandmills.  Spare parts and service readily available through your local Armstrong Stocking Distributor/ Service Center.

Touch Screen Control
Controls all the functions of the Leveler and gives the operator information about the condition of the saws.  There is no need to crawl behind the machine with wrenches to make adjustments, like with European levelers.  Set-ups are fast

Levels from the Inside of Saw
Saws are flatter where it really counts: against the guides and on the wheels.  Any variation in plate thickness due to wear or the butt weld is leveled to the outside.

Non-contact Sensor
Reads" lumps and dish right through pitch or dirt on the saws.  There is no roller to wear out and no dial-indicating needle to vibrate.  Consistently levels to within .001", much more accurate than a dial indicator. 

Leveling Block / Inspection Station
Check your saws before and after leveling at the optional inspection station.  The filing crew can check to see if extra work is required in one part of the saw before leveling begins.  At any point in the cycle, the saw canbe inspected.  Never again remove a saw before it is completely flat.  The 12" wide x 24" long block can be notched on both sides to accommodate double cut saws for a nominal extra charge. 

Total Saw Control
Steel wheels with a special coating to protect the saws control the saw with 2,000 lbs. of strain.  Even large saws or saws with extra tension lay absolutely flat on the carbide rails for precise leveling.