|
CPU Support
|
- VIA Eden V4 500 MHz
- VIA Eden V4 1 GHz
- VIA C7 1.5 GHz
- VIA Nano compatible
|
|
Main Memory
|
- 1 x 240-pin DIMM Socket for up to 1 GB un-buffered non-ECC DDR2 533/400 memory
|
|
Chipset
|
|
|
BIOS
|
- Award System BIOS
- Supports Power On after power fail as a BIOS option
- Supports Wake on LAN
- 4 Mbit flash ROM
|
|
On-board LAN
|
- 2 x 10/100/1000 network connection Realtek RTL8110SC
- Each LAN port reserved with 2-pin header for extended LAN LED (Active, Link 100, and 1000 LAN LED)
- Supports Wake on LAN (When 5 Vsb power available).(LAN1 is available for Wake up, LAN2 is not available for Wake up)
|
|
Audio
|
- VIA, VT1613 CODEC for AC97 V 2.0
- MIC-in, Speaker-out, CD-in, Line-in
|
|
Display
|
- LVDS: VIA VT1636 transmitter, 2 x DF13-20 DP, 20-pin connector for LVDS1 panel output
- CCFL: 1 x CCFL for LCD panel backlight inverter power
- VGA: 1 x DB15 VGA connector
|
|
I/O Interface
|
- Serial port: 4 ports, with 1x 40 pin header, COM 2 for RS 232/422/485
- USB 2.0 x 4
- Parallel port: 1 port, with 2x13 box header (2.0 mm)
- PS/2: 1 x Mini-Din for Keyboard/Mouse
- Digital I/O: 2x4 pin header (2.54 mm)
- IrDA: on-board pin header for IrDA Tx/Rx
- SMBus 2.0 controller
- On-board header for reset SW and HD active LED
- I2C: On-board 3-pin header for I2C, one pin for GND
|
|
Watchdog Timer
|
- Watchdog timeout is programmable by software from 1 second to 64 seconds
|
|
On-board RTC
|
- On-chip RTC with battery back up
- 1 x External Lithium battery
|
|
Storage
|
- HDD: 1 x 44-pin connector (secdonary)
- 1 x internal CF socket
|
|
System Monitor
|
- Derived from Super I/O to support system monitor
- Monitoring of 5 voltages, 3 temperatures and 2 fan speeds.
- 5 voltage (For +3.3 V, +5 V, +12 V, Vcore and +2.5 V)
- 3 temperature (For CPU and two external for system)
- 2 fan speed ( one for CPU and one for systems)
|
|
Power Input
|
- 3-pin header for AT/ATX mode switch
- +3.3 V is converted from +5 V
- 6-pin power input connector
- 3-pin Jst connector to receive the 5 Vsb input from power source
- Factory default setting is AT Mode
|
|
Power Requirements
|
- CPU: VIA C7 1.5GHz/400MHz; Memory: 1 x DDR2 1GB
- Full-Loading Mode: 1.28 A(+12 V), 4.17 A(+5 V)
- Light-Loading Mode: 0.36 A(+12 V), 1.71 A(+5 V)
- NOTE:Full Loading: Utilize CPU 100% with Burn-in test running; Light Loading: Utilize CPU loading below 5% without application running
|
|
ATX Mode
|
- Power required: +12 V/+5 V/+5 Vsb
- Supports Power On push Button, Software Shutdown function and LAN1 remote wake up only
- 2-pin Header for Power On Push Button
|
|
AT Mode
|
- Power Required: +5 V/+12 V
- No Power On push Button, No Software Shutdown function and No LAN1 remote wake up
|
|
Dimensions
|
- 5.25" form factor 203 mm (L) x 146 mm (W) (7.9" x 5.7")
|
|
Environment
|
- Board level operating temperature: 0
|
