DMP- 1032 Engineer Computer

Plug and play operation.

Remove interface cards anytime without the need to power off.

Real signal extension slot, all signals can be measured and tested on the extension slot.

Over-current can be monitored through the debug port, to aid in troubleshooting.

100% protection for PC hardware signal pins, including short-circuit damage and input over voltage

Each pin of the ISA and PCI slot expansion has signal protection.

ISA and PCI slots also have DC output power protection.

Two selectable 16-bit ISA bus slots and 32-bit PCI 2.2 bus edge slots.

Outstanding Featuers

Introduction

The DMP-1032 Engineer Computer is a standalone Vortex86 PC PCI/ISA Interface Development Testing Protector. The Engineer Computer is equipped with a PC system that protects its own system from over-voltage, rush current and shorting of interface signals during the development of your I/O card and specific custom-made hardware during your experiment in laboratory.
This device allows you to perform your PC I/O card development within a PC test platform that provides protection from faulty designs and improper soldering resulting in shorting of signals. After a fault condition, the PC system operates normally without hanging up, allowing the user to debug the faulty target I/O card without powering off and repowering the connected PC.