Computing Platform
|
CPU
|
Intel? ?FC-BGA 479 Celeron? M 600 MHz with 512KB L2 Cache or Intel? Celeron? M 1 GHz with 512 KB
|
Northbridge
|
Intel? 852GM Graphics & Memory Controller Hub (GMCH)
|
Southbridge
|
Intel? 82801DB I/O Controller Hub 4 (ICH4)
|
I/O Companion
|
Winbond W83697HG
|
System Memory
|
1 x 184-pin DIMM up to 1GB DDR SDRAM
|
Video
|
Supports Intel? DVMT 2.0
|
Video Memory
|
64 MB shared memory
|
Audio
|
VIA VT1616
|
USB
|
4 External USB Ports: 1 USB & 1 Mini USB on the rear; 2 USB on the bottom
|
GPIO
|
9 x I/O
|
Thermal Protection
|
Internal sensor generates interrupt
|
Watchdog Timer
|
Can generate system reset from 1 sec. to 255 min. and 1 sec. or 1 min./step.
|
LAN
|
Realtek RTL8100C
|
Expansion
|
2 x Mini-PCI slots (including one optional)
|
|
Display
|
Type
|
15.4 WXGA TFT (1280 x 800 resolution)
|
Color Depth
|
18-bit
|
Brightness
|
500-nit minimum brightness
|
Brightness Control
|
20% to 100% user controllable
|
Touch Screen
|
Resistive
|
Touch Controller
|
Internal USB interface for 5-wire resistive touch panel
|
|
Peripherals and Device Interfaces
|
Headphone Socket
|
One 3.5mm phone jack on left side of bottom access (View from the front side)
|
Phone Handset
|
Two RJ11 sockets either side of terminal
|
Smart Card Reader
|
Integrated in display module
|
User Controls
|
Membrane keypad on front of panel, buttons on bottom
|
USB Ports
|
4 x USB 2.0 ports for external peripherals
|
|
Visual Call Indication
|
Reset Switch recess
|
Internal push button in connector recess
|
Power Switch
|
Power-on only button on front membrane keypad and one internal push button in connector recess
|
Display Inverter
|
Power enable and separate brightness control
|
|
Audio Sub System
|
Amplifier
|
0.3 W RMS headphone output per channel (minimum), Software headphone mute, Independent control of all audio via internal mixer
|
Phone Buzzer
|
Incoming telephone call indication
|
External Speaker
|
2 x 2 W 8 Ohm speaker intergraded in system housing
|
|
Peripheral Devices
|
Hard Drive
|
40 GB 2.5" HDD
|
Power Supply Unit
|
Power input: AC 90-260V
Power output: DC 19V 4.71A
|
|
Mechanical Specifications
|
Mounting
|
Rear fixture to articulated arm VESA mount 75 mm
|
IP Rating
|
IP-65 compliance for front face seal
|
Dimensions
|
457 mm x 342 mm x 99 mm (Handset included)
|
Weight
|
5 kgs / 11 lbs
|
Cooling
|
Fanless design, rear heatsink with wipe clean design
|
|
OS support
|
OS support
|
Windows XP, XPe and Linux are supported
|
|