-
WLAN according to IEEE 802.11n
-
Dual-band radio module with 2.4 GHz and 5 GHz
-
Physical data rates of up to 300 Mbps
-
Compatible with IEEE 802.11agbh devices
-
Operation as access point, bridge, WDS, client
-
Integrated VPN router, providing up to 110 tunnels
simultaneously
-
Distinct increase of data rates for LAN-to-LAN coupling
compared with conventional WLAN bridges
-
PoE (Power over Ethernet) according to IEEE 802.3af
With the IEEE 802.11n compatibility mode, the W1002n offers compatibility with all previous IEEE 802.11g or IEEE 802.11abgh clients and supports the mixed operation of
clients according to IEEE 802.11n and clients according to IEEE 802.11b/g or IEEE 802.11a/h. This permits the trouble-free replacement of existing access points by the new W1002n without the
necessity of exchanging the previous clients. Clients already supporting 802.11n will automatically benefit from the higher throughput and the better coverage of areas.
The operation of two W1002n devices in the bridge mode permits the setup of line-of-sight radio links. Here, again, the benefits of the IEEE 802.11n technology can be used by transferring two
separate data streams. The application of dual polarization antennas permits easy installation. Dual polarization antennas consist of two antenna segments, which are polarized orthogonally to
each other. They, therefore, provide 2 cable connections. This means that the W1002n transmits two separated partial streams from a to b, as defined by IEEE 802.11n. With this technology,
more than triple the data rates can be reached compared to the previous technology. At a distance of 1000 m, net data rates of approximately 75 Mbps (TCP/IP) can be attained by using our dual
polarization antennas.
The power supply is either performed by means of a highly efficient 230-V plug-in power supply or via PoE (Power over Ethernet) according to Standard IEEE 802.3af. In the case of operation
via PoE, it suffices to use a default PoE injector or, for instance, a Funkwerk S128p switch with integrated PoE feeding. Expensive special PoE injectors are not required for the
W1002n.
For the application on the medical sector, the W1002n has been granted admission according to EN60601-1-2, like its predecessor W1002. You can download the
corresponding certificate in the download section, WLAN Products - Conformity Declarations.