Entrance Door

Red lead gulf red finish coat surface drying time is 4 hour, hard dry time is 24 hours

Alcohol acid gulf red finish coat surface drying time ng time is 2 hour, hard dry time is 24 hours

Bi-component acrylic finish coat surface drying time is 0.5 hour, hard dry time is 8hours

Acrylic dilute acid air dry painting surface drying time is 0.me is 0.5 hour, hard dry timedry time is 4 hours

Bi-component epoxy zinc rich primer painting surface drying time is 0.5 hour, hard dry time is 8 to 10 hours

Bi-component epoxy primoxy primer painting surface dface drying time is 0.5 hour, hard dry time is 24 hours

lt;p>Nitr;gt;Nitryl lacquer basic painting surface drying drying time is 0.2 hour, hard dry time is 1 hour

Painting technology: gllogy: gloss of the painting divided intoded into: light, matte, matte, semi-matte, light divided into: touches, semiflat, dead luster. The brighter thehter the pai the paintings are, the more ageing-resistant they are. The drying functions are divided into surface drying and hng and hard drying wdrying wdrying withing with suitable moisture of 65 percent. Eacent. Each kind of painting makting makes different drying time, t time, to ensure tensure the ure the strength of adhesive force and to make it look the same as new, we control the drying time of following:

Ht;p>Ht;p&g;p&g;p>Hot galvanize technology: every : every piece can be welded all together should be welded before hot galvanize and it is not allowed to weld after hot galvanize without any special situation. For hot galvanize products, weep hole should be opened from the private position of the tube to ensure ainsure air flow smooth for molten Zinc and acid wash. To pre. To prevent the sealing of the gate go out of shape, the sealing must be welded after hot galvanize. All products should open up an angle, the two angles welded together inether in stead of welding directly.irectly. The thickness of cold galvanizing layer is 5-15um, can keep the produhe product out of rust for more than 2 years. But hot galvanize technology, the best of allt of all in this fi this field, iron art decoration products are put into about 455 degrees Zinc bath witbath with Zinc rare earth alloy and billet aluminum, is used by our Shou Jee iron art decoration corporation. The on. The thickhe thickness of the hot galvanize layer is above 65