ADIS Automatic Sliding Door

- Lock - Doors remain closed and locked where optional electric lock function has been installed. Exit by way of emergency exit button.

- Exit - Doors remain closed activated only by exiting traffic.

- Open - Doors maintained in open position continuously.

- Auto - Doors are operated automatically via the movement sensors.

FUNCTIONS: following functions are to be selectable through a wall mounted key switch

Key card system

Remote control transmitters

Induction loops

Fine line sensors

Passive infra red sensors

Flush mounted sensors

Microwave sensors

ACTUATION: shall be one of the following:

will incorporate nylon facing surface for pulley tooth protection, for silent and service free operation.

i) Door drive shall be by way of toothed belt reinforced with fiberglass tensile members,

prevent doors from closing if the threshold area is obstructed. Fitting of P.E. light cells will be at 150mm and 600mm from finished floor level.

h) Dual sets of sun resistant P.E. light cells flush mounted in the door jambs will

50% of normal door operation during high winds or low traffic situations.

g) Provision for climate control shall be available. Door opening can be restricted from

failsecure mode will close and secure the doors until power is restored

f) During a power failure or emergency the Failsafe device will fully open the doors. The

direction, if obstructed, sensitivity setting to be programmable.

e) Safety feature: Moving doors will automatically reverse when traveling in either

track wheel is fitted with track wipers to maintain clean contact.

upper track shall be made of harder and stronger alloy and be replaceable. Each

life fitted with anti rise wheels with no possibility of doors disengaging off tracks. The

d) The tracking system is to be dual linear track designed for accuracy and long service

- Option of Solar power provision to be included.

- Built-in UPS (uninterrupted power supply) for continued operation of door under power failure.

- End Position-damping control for accurate slow down of door movement.

- Brake control: preventing the doors from slamming shut.

- Closing speed control.

- Open speed control.

- Provision for full interfacing with all types of building security/alarm systems.

- Independent circuits for pressing closed at the end of the closing stroke.

- Fully compensates door weight and friction therefore delivering the optimum force for efficient operation.

- Self-calibrating and programmable modes.

c) The multifunctional microprocessor control unit shall feature the following:

access.

to the ceiling when required, while the pelmet may be opened fully or removed for

closure and maximum cover. The design shall enable the operator to be fitted flush

b) The pelmet shall incorporate an integrated and interlocking hinge for secure

built- in optical sensor for precise movement, high torque for a maintenance free life.

a) The equipment will incorporate electronic computerized DC Motor with

The Automatic Door Operator is to be a fully electric operator, housed in an extruded aluminum low profile transom section (Height 132mm x Width 155mm) the unit shall be Australian made by an Australian owned company, must comply to AS4085-1992, have a class 3 rating, to suit bi-parting or single sliding doors.

Heavy duty, reliable, good quality, standard length 4. 5m complete with accessory, easy to install,