RFID-keypad lock

4.      Emergency Mechanical Key

3.      RF-ID CARD + PASSWORD

2.      PASSWORD

1.      RF-ID CARD

ACCESS MODE

6.  Press for 3 seconds and touch the RF-ID card,one beep and green light flash,WITHIN 6 SECONDS, enter password (4-12 digits) then press again. Two beeps and green light flash, successfully registered; Failed registered: three beeps and red light flash.

5.  Press ,the screen of the back body will display ,select

4.  Press or to select ID numberMaster ID: ID:

3.  Press for 3 seconds until hear a long beep~~

2.  Verify the Master (RF-ID CARD or PASSWORD) to gain permission

1.  Slide up the cover

Steps

Register RF-ID CARD + PASSWORD

6.  Press for 3 seconds,enter password (4-12 digits) then press again. Two beeps and green light flash, successfully registered; Failed registered: three beeps and red light flash.

5.  Press ,the screen of the back body will display ,select

4.  Press or to select ID numberMaster ID: Ordinary user ID:

3.  Press for 3 seconds until hear a long beep~~

2.  Verify the Master (RF-ID CARD or PASSWORD) to gain permission

1.  Slide up the cover

Steps

Register PASSWORD

6.  Press for 3 seconds,touch the RF-ID Card,Two beeps and green light flash, successfully registered; Failed registered: three beeps and red light flash.

5.  Press ,the screen of the back body will display ,select

4.  Press or to select ID numberMaster ID: Ordinary user ID:

3.  Press for 3 seconds until hear a long beep~~

2.  Verify the Master (RF-ID CARD or PASSWORD) to gain permission

1.  Slide up the cover

Steps

Register RF-ID CARD

All of the Masters can give permission to add ordinary users.

ID number:

The rest 195 users are ordinary user

ID number:

*** The first 5 users are Master, all of the Masters can give permission to add fingerprint.

(If failed, please repeat the steps again carefully till successfully registered.)

Failed registered: three beeps and red light flash.

7.  Successfully registered: two beeps and green light flash;

6.  If select , press for 3 seconds until hear a long beep~~, enter password (4-12 digits) then press again,when hear two beeps, it means the password is already successfully registered.

5.  If select ,press for 3 seconds until hear a long beep~~, touch the RF-ID card,,when hear two beeps, it means the RF-ID card is already successfully registered

4.  Press ,the screen of the back body will display ,(R--RFID card; P--Password;)

3.  The screen of the back body will display ,

2.  Press for 3 seconds until hear a long beep~~

1.  Slide up the coverlong beep~~,green light flash one time

Steps:

Users must REGISTER first, then use the lock normally.

There is no any information for each new lock, when you slide up the cover, you will hear a long beep~~, the lock can be unlock when press the handle. (The unlock state will be remain in 3 seconds)

FIRST TIME USE THE LOCK:

RFID-keypad lock

RFID-keypad lock work with RFID card;
RFID-keypad lock work stable;
RFID-keypad lock low battery alarm