TM card Cabinet Lock

Low voltage warning: If the batteries voltage is low, when touch TM Card that will be a long successive tick from the buzzer.

IV.    Sign of failed operation: LED flashes in red and 3 short tick.

III.     Unlock the lock:  Touch the Mother Card or Child Card lightly to the hole of lock, after a tick and the LED flashes in green, then the lock unlock, and after a while the lock locks automatically. If you want the lock unlocked always, you should turn the Option Switch to the end; touch the card again to lock the lock.

2)        Terminate all Child Cards:  Touch the Mother Card lightly to the hole of lock for 3 times successively, the LED flashes in green, after 3 short tick all of the Child Cards information is deleted from the lock.

1)        Terminate one Child Card:  Touch the Mother Card lightly to the hole of lock for 2 times successively, the LED flashes in green, touch the Child Card which you want to delete from the lock lightly to the hole of lock, after 2 short tick the Child Cards information is deleted from the lock.

2.        Terminate Child Card

1.        Create Guest Card: touch the Mother Card lightly to the hole of lock, after a tick and the LED flashes in green, the lock is unlocked, touch the Mother Card lightly to the hole of lock again, after a tick and the LED flashes in green, touch the TM card which you want to become Guest Card lightly to the hole of lock, after a tick the TM card is recognized as Guest Card by the lock. (You can continue to touch the other TM Cards before the LED stops flashing. After 8 seconds you touch the last card, the LED stops flashing)

II.      Create Child Card (the capacity is 15 for each lock)

I.         Create Mother Card: Connect the power line to the IC, press the Reset Button at the back, after a tick, touch the TM Card which you want to become Mother Card lightly to the hole of lock, after a long tick and a short tick, the TM card is recognized as Mother Card by the lock. Each lock can have one Mother Card at the most; the last one replaces the prior one.

 Function cardMother Card and Child Card. The Mother Card is used to create Child Card. The Child Card is the key of the lock. The same TM card can be shared by all the locks.

Power supply: 3 standard AA alkaline batteries.
Battery life: About one year in normal state