Gate openers

B.     If you learning same code for more than one time, only the last code is memorized

A.     since the data of rolling code is relatively bigger, itll take you a little more time to operate remote with rolling code than that with fixed code.

5.     NOTICE:

B.     Delete all the codes: long press P2 for 8 seconds, LED lights, release your hand and LED goes off, now all the codes are deleted.

A.     Delete one code:  Press P2 for about 1 second and release, LED lights, press the button that you want to delete the code. Then its ok.

4.     DELETING FUNCTION:

        It supports all the codes including fixed code and rolling code.

        Each channel can learn 140 codes at least.

D.    press P1 four times, LED flashes four times and the second channel (bistable) activates.

C.     press P1 three times, LED flashes three times and the first channel (bistable) activates.

B.     press P1 twice, LED flashes twice and the second channel (monostable) activates.

A.     press P1 one time, LED flashes one time and the first channel (monostable) activates.

3.     PROGRAMMING METHOD:

2.     LEARNING CODE: press P1 (1 second at least), LED lights (1 second) and goes off( 1 second) and lights again, now press any button of the remote, if the code is learnt LED will go off. Then release the button of the remote. If the remote cannot read the signal, LED will light for 10 seconds and finish learning status.

1.     When electrified, LED lights 1 second, its ready to work.

FREQUENCY: 433.92MHZ

WORKING VOLTAGE: 6-24V

Gate openers

Garage door openers

Garage door receiver

Porfessional manufacturer
Supports all the codes including fixed and rolling code
Each channel can learn 140 codes at least