Ft338 CABINET HF READER
Product Details
The rear shell and dead bolt are made of stainless steel and the front shell is made of plastic
The battery and motor clutch assembly are installed at the back of the lock body
4 AA alkaline batteries are used, and the circuit board is installed on the front lock body
Three level management (master card, management card, guest card)
Press the trigger button on the panel of the lock body and then use the card to open the lock
Normal lock or passage lock opening mode can be selected by turning the switch
Number of guest card, from 1 to 5, can be adjusted by turning the switch
The guest card is used for opening and closing the door
Supports RFID standard: EM4100 and ISO15693 or Mifare RFID standard (based on you option)
Specification:
Power supply: DC 6V, 4AA alkaline batteries, under-voltage indication is provided
Static power consumption less than 30uA
Starting current: less than 400mA
Effective unlocking time: 4 to 5s
Environment requirement:
Temperature -20 to 55 degrees Celsius
Humidity: 20% to 90%
Size of the front lock body(L x W x T): 110 x 62 x 20.5mm
Size of the rear lock body(L x W x T): 133 x 65 x 21.5mm
Lock system net weight: 459g
Card key compliance: EM4100 and ISO15693 or Mifare RFID standard (based on your option)
Key Specifications/Special Features:
FT338 is a LOCK WITH RFID FUNCTION.
- Model Number:FT338
Send inquiry / quota request to Ft338 CABINET HF READER
Relate products of Ft338 CABINET HF READER
Invengo hf rfid readers offer a high detection level of performance and are easy to integrate. The rfid reader 1m range operates on the high frequency of 13.56 MHz and it works in a near field range, generally, it is shorter than 1m. TYPES OF INVENGO HF READER Searching for The ...
Come From Invengo Information Technology Co.,Ltd.
Features 1. Bluetooth communication interface, battery-powered and rechargeable. 2. Support the work of the high-frequency band 13.56 MHz. 3. Comply with ISO/IEC14443 A/B, ISO/IEC15693 international protocol standards. 4. Support a variety of contactless smart cards and ...
Come From Shenzhen DTB RFID Co., Ltd.
JMY6801 is a series of RFID read/write module with RS232C communication port. JMY6801 has various functions and termss multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could ...
Come From JINMUYU ELECTRONICS CO.,LTD
