Flooring

Dang Thuy Linh

Best regards.

We are looking forward to hearing from you soon.

Please let us know your requirement of products.

Packing: Nylon, Carton and Pallet

- All lamellas must be bevel ?edge with radius of 2 mm.

- Products surface must be treated with sandpaper, to be clean and clear and polished with oil.

- Allowed tolerance for lamellas in width and thickness: +/-0.1mm.

2. Processing quality:

- No rotten, decay, blue stain, no bowing.

- All dead knots are fill out with pasta ( wood flour mixed with glued ), same color with products color.

- Diameter of dead knots on the side A and B is not exceeded 10mm. Dead knot on C side is not over 25 mm.

- Sapwood is not allowed on the A and B side .

- A side is the front ?view of the product. B side is the side view of the product. C side is the bottom side view of the product.

1.Surface quality:

Quality:

8-12% kiln dried

Structure : Acacia decking tile is made from 9 surfaced lamellas and 3 bottom lamellas and are matched to each other with glue, screws and nails.

Size of Lamella : 12x50x500 mm ( T x W x L)

Size: 24x500x500 mm ( T x W x L)

5. Acacia decking tile

Packing: Nylon, Carton and Pallet

Measure: FJ/ FJL

Wood species : Vietnam Pine, Acacia, Pomu

Grade B, C : No crack, no pinhole, blue stain are allowed, knot allowed to be repaired, lamella width 40-45 mm

Grade A : No crack, no pinhole, no blue stain, no knot, lamella width 45mm

KD : 12%

Size : 72mm x 86mm x 5900/6000mm

4. Three layers window scantling ( 3 layers )

Packing: Nylon, Carton and Pallet

Wood species: Vietnam Pine, Acacia, Oak, Pomu and European pine

Grade B, C: No crack, no pin hole, blue stain are allowed, knot allowed to be repaired.

Grade A: No crack, no pinhole, no blue stain, no knot, lamella width from 30- 45mm

KD: 12%

Length:        1220/2440/3640/4200/4500 mm

Width:          300/610/915/1200 mm

Thickness:   18/24/30/40 mm

Size:

3. Finger Joint Panel ( FJL Board ) and Laminating Panel

Packing: Nylon, Carton and Pallet

Wood species: Bangkirai ( Yellow Balau ), Laos Pine

KD : 25%

Grade A. One side free of defect. No crack, no cupping, no knot, no blue stain, no sapwood, no pinhole. One face grooves for non slip protection, Pencil round chamfer the long corner.

Length:        1500/2000/2700/3000mm

Width:         105/110/120

Thickness:   20/30mm

Size:

2.Decking

Packing: Nylon, Carton and Pallet

Wood species: White Oak, Pyinkado, Narra Padauk, Takkyan, Hinoki, Laos Pine

Tolerance on thickness: +/- 0.1mm ( 15 thick and less), +/- 0.2mm ( 18 thick and less )

Tolerance on length: +/- 1 mm

Less than 2 mm bending over 1000mm running meter Cupping is not allowed.

KD: 12%

The quality of ABC Grade:

C - Grade : The face may contain sapwood, big streaks, burls, imperfections, and knots which do not exceed 3.54mm in diameter. No pin worm hole is allowed. C- grade allows colored repaired knots. Sapwood is allowed for max. 30% of the width and 30% of the height. Sapwood should be repaired.

B - Grade : The face may contain small streaks, burls, slight imperfections, black lines, black colored knots and tight knots which do not exceed 2.45mm, with an allowance of 4 knots every running meter for 90mm wide and below. 6 knots are allowed for 120 mm wide and above. Knots should be repaired. In principle free of sapwood. . More color variation allowed within the parcel.

A - Grade: The face shall be practically free of defects- no sap wood/ no heart wood/ no blue stain/ and no crack. A grade admits some small healthy knots with a max. diameter of 5.4 mm, with an allowance of 2 knots every running meter for 90mm wide and below. 3 knots are allowed for 120 mm wide and above. Uniform of color with small limited character marks.

Length:      450/600/750/900/1050/1200/1500/1820mm

Width:        90/120/150 mm

Thickness: 12/14/15/18 mm

Size:

1.Wooden flooring and wall panel:

We would like to make a good business with you by offering our products such as Floorings, decking, decking tile and wooden panel are made from material of Laos pine, Vietnam Pine, Acacia, Oak, Beech,Pyinkado, Pomu ( Hinoki), Takkyan ( Asian Walnut ), Narra Padauk ...with wide range of products from Solid flooring, Finger joint (UNI) flooring, Finger Joint Laminate flooring(FJL), Bangkirai decking, Acacia decking tile and Vietnam Pine Finger Joint Panel, window, door jamb ( scantling), engineered wood flooring.

First of all we would like to introduce ourselves, we are a manufacturer locate in Vietnam specialize in producing  wooden flooring and wooden panel. Our products are now mainly exported to EU, Japan, Taiwan, Korea with attractive and competative price

Flooring, decking, FJ and FJL Panel