ARMEKA ESD/STB Epoxy Coating Flooring

If ESD/STB is to be used on older existing floors specific pre-treatment will be required. Each floor must be assessed by an export to determine the appropriate preparation work needed. For a prompt reply regarding our products and their application in your premise please direct your questions to us or our authorized contractors.

Note

ESD/STB is free from solvents and nearly odour free during application. It is entirely non-flammable. The main precautions is that workers  should protect their bare skin from contact with the product before it is used.

Working hygiene environment

Oil sports can be removed by using degreasing agents.Suggestions will be provided as to the actual cleaning methods most suitable for the client's local conditions.

The floor can be cleaned by a variety of methods: including by brushing machines, mopping, sweeping or vacuuming. Alkaline cleaning agents may be used if necessary.

Cleaning instrustions

Chemical resistance            Presented upon request

Mechanical properties          Presented upon request

Surface structure                 Slightly anti-slip

Color                                  Standard Dark grey, also other colours available.The color of the floor can be changes by mixing black sand with any other primary color

Normal thickness                3mm, but can increased according to demands

GENERAL SPECIFICATIONS

Body charge, walking test  Less than 100 volts

System resistance            Less than 35M