Marble Sheets

  In-40 degrees to 130 degrees between,the ceramic tile compound board does not distort,does not crack.

6.Bears,the low temperature performance high is good

  Because ceramic tile compound board back ceramic tile can the structure be close,the water-absorptivity is low,in addition among an aviation uses specially the system glue line,in the former home grounds surface water share and the cement alkali share is unable to permeate,causes the stone material surface color,the luminosity are lasting.

5.The pan counter-yellow,the luminosity is lasting

      Does not need to hang dryly,only uses the Portland cement to paste directly in the wall surface or the ground,the work efficiency is quick,installs the cost the traditional marble to be lower than.

4.Easy to construct,installs the cost to below

  Because the ceramic tile marble compound board cuts for a traditional marble piece of minute is becomes two to three institutes,therefore reduced the pan overall chromatic aberration.

3.The chromatic aberration are few

Reduced the traditional marble because of the crack,the transportation and middle construction breakage.

2.Impact performance enhancement

Is only equal to the traditional marble weight approximately 1/2 left right,reduced the floor stress weight.

1.The proportion is light

Marble Sheets-ceramics series

The proportion is light; Impact performance enhancement; The chromatic aberration are few; Easy to construct,installs the cost to below.

Marble Sheets-ceramics series

We offer various products of different specifications,different stone surface materials and different structure forms in accordance with customers demands.they are easy to install & applicable for wall andceiling, therefore greatly expedite the construction schedules.

4.Easy installation.

The sound-insulated heat insulation effect is good;Anti-impact strength ratio same level thickness granite big 10 times.Not only the HLT stone  material honeycomb board maintained the original natural stone material decoration effect,moreover has overcome the natural stone material crisp also brittle,the weight big and so on the shortcomings,has the better impact resistance and the anti-flexure intensity,was the user community has provided one kind of new construction stone material product.

3.Excellent capability.

Especially for Aluminium Honeycomb Laminated Panel,because of its special structure,the air layer inside aluminum can greatly reduce the heat Conduction between indoor & outdoor to save the energy.According to the mensuration,its conductive coefficient is only 1/10 of common stone panel.Furthermore,comparing to normal marbles,the usage rate of this product is 3-4 times higher as it is a veener of2-5mm only and thus significantly saves natural resources.

2.Energy saving and environment protection.

The standard  Stone Honeycomb Laminated Panel &Aluminium Plastic Laminated Panel only weigh 1/5 of common stone panel,which reduces the selfweigh of building ,thus greatly limproves the safely of the indoor & outdoor omamentation of high-rises.

1.Safely .

Marble Compound Aluminum honeycomb series

  • Country:China (Mainland)
  • telephone:86-575-13606751928
Delivery Time: 3Week
Package: Export standards
Supply Ability: 10000 Square Meter per Week
Minimum Order Quantity: 1 Square Meter
Payment Terms: T/T
Port: Shanghai/Ninbao
Fob Price: US$30.00-56.00Shanghai/Ninbao
*Your name:
*Your Email:
*To:Shaoxing Ganglong Textile Co., Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

7075 Aluminium Sheet

China 7075 sheet is one of one of the strongest of the aluminum alloys. Its use parallels that of 2024, with china 7075 aluminum selected when higher mechanical properties are desired. Aluminium en aw 7075- With one of the highest strength to weight ratios for heat treatable ...

Come From China Aluminium Industry Supply Chain (Tianjin) Co., Ltd

Aluminium Sheet

Sheet, thickness range from 1mm to 6mm ;the most widely used form of aluminum, is found in all of the aluminum industry’s major markets. In packaging, sheet is used to manufacture cans and packages. In transportation, aluminium sheet china is used to manufacture panels for ...

Come From China Aluminium Industry Supply Chain (Tianjin) Co., Ltd

Nickel Alloy Plate, Nickel Alloy Sheet, Stainless Steel Plate, Stainless Steel Sheet

Product Name: Nickel Alloy Plate, Nickel Alloy Sheet, Stainless Steel Plate, Stainless Steel Sheet Standard: GB, AISI, ASTM, DIN, EN, JIS Process: Hot Rolled, Cold Rolled, Forged Size: Can Be Customized Surface Treatment: NO.1, 1D, 2D, 2B, NO.4, BA, HL, Mirror, Embossim, ...

Come From Allianz Steel Group