Ceramic & Porcelain - Constellations

Ceramic tile suggested for residential, commercial and institutional floor subjected to heavy traffic.

Class 5 - Heavy Traffic:

High foot traffic, areas where abrasive or outside dirt could be tracked. Residential entry, kitchen, balcony, and countertop.

Class 4 - Moderate to Heavy Traffic:

Any residential area with the possible exception of some entries and kitchens if extremely heavy or abrasive traffic is anticipated.

Class 3 - Light to Moderate Traffic:

Slipper or soft-soled shoes. Second level main bathroom areas, bedrooms.

Class 2 - Light Traffic:

Very low foot traffic, bare or stocking feet only. (Master bath, spa bathroom).

Class 1 - Very light traffic:

Wall tile only and should not be used on floors.

Class 0 - No Foot Traffic:

PEI classes range from 0 to 5. The Porcelain Enamel Institute rating scale is not a measurement of quality. It is a scale that clearly indicates the areas of use each manufacturer recommends and has designed their tile to fit. A PEI 2 tile has been designed for areas where very low traffic and soiling is anticipated. In most cases the aesthetic detailing of these tiles is of prime consideration. You will often find high gloss levels, vibrant colorations and metallic elements in this group of tile. Conversely, a PEI 5 tile has been designed for abusive extra heavy foot traffic. The technical aspects such as surface abrasion resistance will be considered and must be achieved first before aesthetic effects are incorporated.

Where can your tiles be used and what is a PEI rating?

A glazed tile is already stain proof, so there is no purpose to putting on a sealer. You may put a penetrating sealer on your unglazed tile or your grout joints. The penetrating sealer is an invisible, stain resistant shield that is absorbed into the surface.

Should a sealer be used on ceramic tile?

Glazed tiles are coated with a liquid glass, which is then baked into the surface of the clay. The glaze provides an unlimited array of colors and designs as well as protects the tile from staining. The unglazed tiles are pretty much the same as the glazed tile, except that their surface is not coated. Full-body porcelain tiles do not show wear because their color extends throughout the tile, making them ideal for commercial applications.

What is the difference between glazed and full-body tiles?

To be used outdoors, we recommend the tile must be frostproof and unglazed for floor use. Make sure the absorption rate is 0.5% or less.

Can ceramic tile be used outdoors?

Ceramic or non-porcelain tiles are generally made from red or white clay fired in a kiln. They are almost always finished with a durable glaze which carries the color and pattern. These tiles are used in both wall tile and floor tile applications, are softer and easier to cut than porcelain, and usually carry a PEI 0 to 3 rating. Non-porcelain ceramic tiles are usually suitable for very light to moderate traffic and generally have a relatively high water absorption rating making them less frost resistant and they are more prone to wear and chipping than porcelain tiles.

Porcelain is available in polished, smooth and natural finishes and a quality porcelain will remain constant over time.  It is a spray-dried body of selected clays. It is resistant to wear, deep abrasion, and frost.  It is ideal for interior and exterior floors and walls and facades of buildings. Porcelain tile is a tile that is generally made by the dust pressed method from porcelain clays which result in a tile that is dense, impervious, fine grained and smooth, with a sharply formed face. Porcelain tiles usually have a much lower water absorption rate (less than 0.5%) than non-porcelain tiles making them frost resistant or frost-proof. Glazed porcelain tiles are much harder and more wear and damage resistant than non-porcelain ceramic tiles, making them suitable for any application from light traffic to the heaviest residential and light commercial traffic. Full body porcelain tiles carry the color and pattern through the entire thickness of the tile making them virtually impervious to wear and are suitable for any application from residential to the highest traffic commercial or industrial applications. Porcelain tiles are available in matte, unglazed or a high polished finish.

Apart from our saltillo (clay) tile Stone Saver chooses to offer our customers only the highest quality glazed and full body porcelain tiles to ensure years of worry free use, at prices comparable to or less than non-porcelain ceramic tiles.

Tile terminology can be confusing. Most types of tiles that are made from clay or a mixture of clay and other materials, then kiln-fired, are considered to be a part of the larger classification called Ceramic Tiles. These tiles can be split into two groups, porcelain tiles and non-porcelain tiles. These non-porcelain tiles are frequently referred to as ceramic tiles by themselves, separate from porcelain tiles.

What is the difference between standard ceramic tiles and porcelain tiles?

Murals, accents and listellos on natural stone tiles are perfect for kitchen backsplashes, and many other interior wall coverings such as bathrooms and wine cellars.  We use a variety of stone, for example tumbled marble and travertine.  Many of the products we offer are hand made, the clarity and beauty will surpass your expectations..

You can find the perfect look in Listello & Deco Borders. We can help you to design your look.

If a Mural is what you are looking for, we can supply you with a wide variety of options and a gorgeous finish.

These are just a few of the outstanding products we offer.

Listello, Deco, Ceramic and Porcelain Tile