Jessen Tile

Surface Preparation Grout only after the tiles are set and dried (24 hours for wall tiles and 48 hours for floor tiles).MixingMix according to amount required. Use clean water and mix to a creamy consistency. Pot life is approximately 1 hour.ApplicationApply grout with a rubber float or squeegee at a slight angle to the tiles. Spread grout across the tiles diagonally. Fill joints completely and remove excess grout with a float or squeegee as you go along.Let grout set for 20 minutes then wipe tiles diagonally with a square-edged sponge or damp cloth. Rince sponge or cloth often but keep it as dry as possible. Let joints dry for about 15-20 minutes, or until a haze forms on the tile, then polish with clean paper towel or clean cloth.Let grouted joints set for at least 24 hours. Back to TopTechnical Data Basic Binder Orinary Portland Cement Colour White or Grey Filler Materials Clean, graded limestone powder Additives Special Additives for water-repellency, workability and adhesion. Consumption Varies according to size and width of tile joints Packing 20kg bag Shelf Life 6 months under dry shade