Thermo panels Pre-fabricated Wall Elements:

Pre-fabricated Wall Elements:
The most common method is topre-fabricate wall elements from the profiles at the factory in orderto shorten the time needed for construction work on the building site.Elements can be delivered object-made with thermal insulation and wallplates, or as completely ready elements with windows and doorsinstalled.
When constructing a house fromthermopanels at the building site only a light lift is needed and abrigade of a few men. Wall construction will go fast as most workoperations have already been made at the factory. Panels with specificmeasurements are set in place, attached to the foundation and/ orpartition ceilings, and connection joints will be made dense. Allmaterials used for exterior padding are suitable for fa?ade materials.For roof carriers, in general, are thorn plate-wooden frames,foundations are built following the common project rules of thumb.Panel interior walls may be covered with materials suitable forpurposes of rooms.

Thermopanels

Thermopanelwalls are exterior walls, which standing structure is made ofthermobatten. In case of thermopanel system the entire building will bemounted from large elements manufactured at a factory. Stiffness ofthermopanel system is guaranteed by construction plates covering thestructure from both sides, in case of need also by additional supportstructures placed underneath plates. The frames are entirely filledwith mineral or rock wool filling and a vapour barrier is installed inthe inner surface of the walls.

Thermopanel is comprised of:
1. Enforced plaster plate 13 mm
2. Vapour barrier plastic 0,2 mm
3. Mineral filling 200 mm
4. Thermoprofile structure/
frame 200 mm
5. Wind barrier plaster plate 9 mm

Thermoprofiles

Thermoprofile orthermobatten is a thin-walled bent profile made of galvanized steelsheet, which is meant for construction of exterior wall structures andfacades. The strength of steel and good workability allows makinglight, thin but at the same time strong constructions. The perforationin the center part of thermoprofile cross-section cuts through the coldbridge, reducing substantially steel sheets thermoconductivity.Thermoprofile and for the same cross-section wooden beam thermaltechnical showings are in the same class. Also thermo- profile wallssound isolation features are on a good level. For example, the measuredattenuation of traffic noise of a panel of 175-mm profile is 43 dB andthe attenuation of other outer noise is 51 dB.

Steel thermoprofile is:
1. Light but strong and sturdy
2. Strong heat protection
3. Stands up to weather conditions
4. Even material structure and quality and exact
measurements
5. Environmentally friendly saves wood, creates
little waste and may be re-worked
6. Workable with fast and simple methods, may be
mounted and erected

TheThermo Profile is a light, measure-exact, stable, recyclable anddurable product. We are useing in our products Ruukki CorporationNordicon Thermo Profile system. Wall can be made from steel, wood,bricks, aluminum, glass, plastering, as well as from stone or ceramictiles.

Pre-Cut System:
The pre-cut Thermo Profiles areinstalled to act as a frame at the building site. After that, walls arethermal insulated with mineral wool, wall plates as well as windows areinstalled, and the facade cladding is put in place.

Applications:
In the exterior walls of detached family and terraced houses, the Termo Profiles are mostly used as the load-bearing structure.
Inresidential multi-storey buildings, the Termo Profiles are mostly usedas the load-bearing part of the facade, but they dont bear floors orthe roof, i.e., the Termo Profile walls are used as non-load bearingexterior walls.
It is recommended to use square-like or band-likeelements for commercial and office buildings. The Termo Profiles arealso suitable for renovation. When building additional storeys andspaces, the Thermo Profiles are used in the same way as in newbuildings. Where old facades are repaired, the Termo Profiles can beused as a frame structure for a new cladding which substitutes thedemolished cladding or the exterior surface.

Pre-fabricated Wall Elements: