NATTY Calcium Silicate Fire-proof Board (fiber cement board)

NATTY is a specially processed hi-tech product, using quality Portland cement, calcium silicate, diatomaceous earth and non-organic fiber through high temperature steam incubation under the guidance of the advanced Japanese technology. It is green and environment-friendly, a safe reliable construction material having fire-proof, wet-proof, moulds-proof, sound-proof, heat-proof, shock-proof, impact-proof features. Now the material is widely used for indoor partition, outdoor curtain, piping chamber, kitchen and restroom partition, underground clean room and ceilings.

Thickness(mm)

Width x Length (mm)

Corner/edge Handling

6 / 8 / 9

10 / 12 / 15

18 / 20 / 25

915 x 1830

1220 x 1830

1220 x 2440

Right Angle

Reverse Angle

1. Density: 1100~1450kg/m3
2. Bending strength:
Vertical-130 kgf/cm2 above
Horizontal-110 kgf/cm2 above
3. Impact-proof: Test sample was not penetrated by a 0.5 kg drop hammer impacted
4. Heat Conduction: 0.1 kcal/m.hroC below
5. Linear Expansion: below 0.1%
6. Conform to CNS6532 Incombustibility class 1
7. Fire-proof : 1hr fire-proof rating in drywall structure
8. Mould-proof, Germproof

1. Light Steel Frame

a.	Draw the installation line to define the fixing position.
b.	Use the shooting steel nail to fix top C-STUD, and floor C-STUD on the ceiling and floor.
c.	Arrange the vertical C-STUD according to the request (usually 400mm), and install the horizontal C-STUD.

2. Fixing Method of NATTY board

a.	To cut the board as per required size which is 10mm shorter than the wall high.
b.	The boards should be in crisscross arrangement fixed on C-STUD by the tapping screw. The Distance between tapping screw is 200~250mm, and each screw should enter 0.5mm depth into the board.
c.	Please leave a joint about 3mm between boards.
d.	When fixing the board, please fix from its center to edges. Dont fix it at different points at the same time to avoid the over bending of the board.
e.	Before fixing, we can place rock wool or glass fiber into the empty space between the boards to get better effects of sound-proof and fire-proof if necessary.

Appellation	(unit:m/m)	L.(FT.)	Stuff
U-BAR	38 x 12 x 1.0	12'	EG
W-BAR	45 x 19 x 0.45	12'	EG
HANGING HOOK	6		EG

1.	Draw the installation line to define the fixing position. The center distance is 1200mm.
2.	Use the hanging to link and fix the boom and main W-Bar, and keep main W-Bar in horizontal.
3.	Use the caliper to fix sub W-Bar vertically on main W-Bar. The center distance of sub W-Bar is 612mm.
4.	Use the tapping screw to fix the board on the sub W-Bar, and finish the joint connection

Country:
telephone:

NATTY Calcium Silicate Fire-proof Board (fiber cement board)

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters Remaining: 0 / 3000
*Enter the secure code shown below	Reload Image

NATTY Calcium Silicate Fire-proof Board (fiber cement board)

Product Details

Send inquiry / quota request to NATTY Calcium Silicate Fire-proof Board (fiber cement board)

Social Connect

Browse by Category

Contact Us