Fiberglass Self-Adhesive Mesh Tape

Packing:
Width (mm): 35, 40, 42, 46, 50, 100, 150, 200, 1000.
Length (m): 10, 20, 45, 90, 153
Each roll is shrink-wrapped, or to be packed in plastic bag.
Diameter of paper tube (mm): 55, 76
Storage:
Store rolls in a cool, dry location
Store away from direct contact with the ground or concrete
Store out of direct sunlight
Protect rolls from weather and other damage

6.       Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

5.       Apply sufficient thin finishing coats to produce a smooth wall surface;

4.       Let dry completely, then sand slightly;

3.       Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape;

2.       Center and apply tape over the length of the joint and pressing firmly;

1.       Wall must be clean and dry;  

Color: white, yellow, blue, etc.
Based on order, special specifications are also available.

Fiberglass self-adhesive mesh tape is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucc