Leica M7 DIGITAL CAMERA

610 g (without batteries)

(W x H x D) 138 x 79,5 x 38 mm

Weight

Power supply
2 lithium cells, type DL 1/3 N. Battery check shown by flashing of the LEDs in the digital display or the light balance or by illumination of the display bc or the LEDs going out.

Dimensions

6 V

Tripod thread
A 1/4 (1/4")DIN in base plate.

Operating voltage

Material
Enclosed all-metal body with foldable rear panel. Brass top plate and base plate, both chromium plated in black or silver.

Frame counter
On the top of the camera. Resets automatically on removal of base plate.

Camera body

Rewinding
Manually with rewind lever after turning the lever to R on the front of the camera.

Advancing
Manually with quick wind lever or motorized using LEICA MOTOR-M.

Shutter release
Three stages: energizing metered exposure value storage release. Release button has an integrated thread for standard cable releases.

Film transport

Shutter speeds
stepless from 32 s to 1/1000 s in the AUTO automatic shutter speed control mode. In the manual mode, from 4 s to 1/1000 s in full steps, plus B for time exposures of any length. Flash synch speed 1/50 s.

Shutter
Horizontally running, rubberized cloth focal plane shutter. Extremely quiet. Controlled electronically, plus two mechanically-set shutter speeds : 1/60 s and 1/125 s.

LED symbol for flash status; four-digit, seven-segment LED digital display; display brightness adjusts automatically to ambient brightness; decimal point as well as a point above it for the indication of film speed; exposure correction warnings; the automatically generated shutter speed in the automatic mode; indication of the use of a stored exposure setting; warnings of brightness readings below or above the cameras measuring range in the automatic shutter speed mode and of exposure times longer than 2 seconds. LED light balance with two triangular and a central round
LED in the manual exposure control mode.

Shutter and shutter release

Displays when flash is being used
Readiness : The flash symbol LED
in the viewfinder remains lit.
Flash confirmation: The LED remains lit or it temporarily blinks rapidly after the exposure. Under-exposure is indicated by a temporary extinction of the LED.

Viewfinder displays along its lower edge

Film speed range for TTL flash exposure metering
ISO 12/12

Selected high-grade materials, extremely tight tolerances and strict quality control at every step of the manufacture