FlyCamOne3 - FCO3 Camera

98x50x15mm
62g incl. mounting plate
500mAh Lipo
battery & memory, Mode und Action
VGA
28
2 Step motors (Pan,Tilt), external by RX cable
VIA Video Sensor
Micro SD with min.4MB writing speed <= 8GB
Overlay Data-IN for GPS-data and RX-cable


TFT 2" (4:3)
60x50x20mm
no


60x50x23mm
40g
550mAh Lipo
2.4GHz (4 Channels)
10mW


98x50x15mm
1000mAh Lipo
2.4GHz (4 Channels)
A/V 3,5mm socket

Transmitter modul**
Size
Weight
Battery
Frequenzy
Power

Receiver modul**
Size
Battery
Frequenzy
Video Out

Camera modul*
Size
Weight
Battery
LCD
Resolution
FPS
Head movement
Motion sensor
Memory
connector

Screen modul*
Typ, dimension
Size
Battery

FCO  the new FlyCamOne beyond imagination!
           
The FCO, as the 3 issue of the successfully FlyCamOne series enables completely new possibilities.
In the past you need to take your PC or laptop to watch your recorded videos.  Within the FCO Core Set a 2 TFT screen is included. It can be separated from the camera to save weight.
The screens place can also be taken by the mounting base or by the FCO video-transmitter (part of the FCO transmitter set). The camera now sends the video at 2.4 GHz to the receiver connected with the screen.
The receiver module can also be connected to the soon available FCO V-Eyes. Like that you can see the world from the birds view as a live stream. Data like speed, high and direction will be supplied by the separate GPS-module. The cams head follows with the integrated Head-Tracking-System the movement of the pilots head, as far as the model-receiver has three free channels (pan/ tilt/ trigger). Last but not least a 433 MHz transmitter /-receiver (FCO Linx) will be available. Like that it?s also possible to move the cams head and trigger the recording without the models transmitter.

Technical Data

Camera with seperated 2.4GHz Transmitter for FPV Flights with RC model plane