10 channel wireless controller

3.  Turn off the left and right machine input when it stops.

2.       When retreat, the left and right turning lights flash one time per second at the same time.

1.       Receiver controller turn on left and right machine at the same time and turn reverse, remote control boat retreats.

Control manner:

Press the retreat key on transmitter, boat retreats, loose the key, stop retreating.

7.       Turn off the left and right machine input when it stops.

6.       When automatic retreat, the left and right turning lights flash one time per second at the same time.

5.       During the process of controlling automatic retreat, if the receiver controller receives any available control signal from transmitter, automatic retreat operation stop, instead by hand operation.

4.       If the receiver controller doesnt receive confirmative signal to go forward from remote control transmitter within 6s, the receiver controller will stop going on, and autocontrol retreat 10s. (If it doesnt receive the confirmative signal to go forward from transmitter, means it leaves the maximum scope that the transmitter controller can control, so, auto retreat for 10sis convenient.)

3.       The receiver controller receive confirmative signal to go forward from remote control transmitter ceaselessly, and move on.

2.       After the receiver controller send out the signal to go forward, it will send out a confirmative signal to go forward timely each 2 seconds.

1.       The receiver controller receives the forward signal and start the left and right drive machine and turn positive, remote control boat go forward.

Control manner:

Press the forward key on the receiver, the boat goes forward. Loose it, the boat moves on. Press the forward key again, stop

The spec description of remote control boat

Suggestion: the size of receiver board: 95*60mm

 (22)       relay output standby, positive voltage output

 (21)       relay output standby, positive voltage output

 (19) (20)   receive signal input

 (17) (18)   copy code switch

 (15) (16)   the back right light 12V 30-50mA (forward, lights, turn right, flashes)

 (13) (14)   the back left light 12V 30-50mA (forward, lights, turn right, flashes)

(11) (12)   headlight 12V 30-50mA

(9) (10)   right slowdown machine that can supply feed. 12V turning positively, stay 2 seconds, turning reversely 48 seconds.

(7) (8)   left slowdown machine that can supply feed. 12V turning positively, stay 2 seconds, turning reversely 48 seconds.

(5) (6)   right thruster machine

(3) (4)   left thruster machine

(1)    (2)  12V power supply input

Pin distribution:

B.      Receiver fan-out (the space between grooves is 4mm, 22 pin)

5. I key is standby

4. 2 keys control left and right machine that can put down fishhook.

3. 1 key controls the front head lamp (press one time, its on, and press again, its off)

2. 2 keys control left and right machine that can supply feed.

1. 4 keys control forward, turn left, turn right, reverse

A.      The function of the remote control:

New boat spec

fishing vessels, Gear alarm controller