terminal first layer epoxy system

the seller can not control the operational way of epoxy in customer side ,in any cases ,the seller will not afford the losses causes in customer side .When applying the product, the customer should have related testing experimentation prior to try big quantity.

  Such products performance was related with operational condition and actual operation ,the seller can not guarantee practicability of some specific purpose. Also

5 Remarks

f.        If eye contacted ,please wash with running water for 15 minutes ,then seek medical treatment

e.       If contacts with hardener , to cause skin allergic, Please dip it in 1% dilute acetum liquid for 30 minutes ,then seek medical treatment

d.       Wash hands carefully with soap ,if possible wash with acetone and alcohol first ,then soap and water

c.       Wear gloves

b.       Avoid contact with human body directly

a.      Keep working condition clean, air fresh ,if possible ,provide a ventilator

This product does not belong to dangerous article when curing completely. But incompletely cured epoxy resin and hardener have more or less plethora to human body .So please pay attention to following points

4. Safety Attentions

c.     The liquid of the container, once opened, should be tightly re-covered to avoid the resin from deteriorating by other materials pollution

b.     Pay attention to the pot life time ,when part A and part B mixed ,please try to use up during pot life stated above , or it will effect the application techniques and quality of the products.

a.      Part A epoxy resin may cause sediment during storage time, please stir carefully before using .

3. Application Attention

140

@26 50g mixture

Exothermic peak

terminal first layer epoxy is to lower the cost and get good acid corrision protection