S7-300 Front Connector

Front connectors 20-way with spring contacts                                         700-392-1BJ01
Front connectors 40-way with spring contacts                                         700-392-1BM01

The 20-way and 40-way front connector from the Systeme Helmholz GmbH uses spring contacts. The front connector permits simple connection of sensors and actuators to input/output modules of Systeme Helmholz GmbH or other manufacturers. The wiring can thus be retained even in the event of module replacement.

Front connector with spring contacts

Front Connector for DEA 300, 20-way with screw contacts                       700-392-1AJ10
Front Connector for DEA 300, 40-way with screw contacts                       700-392-1AM01
Front Connector for DEA 300, 40-way with EasyConnect?  technology     700-392-1AM10

Front connector with EasyConnect? technology
The 40-way front connector from the Systeme Helmholz GmbH is supplied with EasyConnect? technology.
The connector is quickly wired up simply by opening and closing the spring-loaded terminal by turning the screw head (180 counterclockwise to open, clockwise to close). That not only saves the user money but also installation time.
The flat design permits optimum closing of the module front cover even with the connector fully wired.

The 20-way and 40-way front connector from the Systeme Helmholz GmbH uses time-tested screw connections.
The front connector permits simple connection of sensors and actuators to input/output modules of Systeme Helmholz GmbH or other manufacturers. The wiring can thus be retained even in the event of module replacement.

Front connector with screw connections

Features
  Frontadapter for ribbon connector
  20-way and 40-way
  Fast, safe and cost-effective wiring
  Connection errors excluded

FastPlug 20-way, S7 Frontadapter ;   700-921-1AJ01
FastPlug 40-way, S7 Frontadapter ;   700-921-1AM01
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 0.5 m ;   700-923-2BA50
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 1.0 m ;   700-923-2BB00
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 1.5 m ;   700-923-2BB50
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 2.0 m ;   700-923-2BC00
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 2.5 m ;   700-923-2BC50
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 3.0 m ;   700-923-2BD00
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 4.0 m ;   700-923-2BE00
Twisted ribbon cable, unshielded, 20-way, 2 ID- connectors, 5.0 m ;   700-923-2BF00

The new FastPlug Frontadapter are available to be connected to a 16 Bit Input/Output module with a 20pin ribbon connector and a 2 x 20pin ribbon connector for 32 Bit Input/Output module.

The new professional FastPlug Frontadapter from the Systeme Helmholz GmbH are intended for insertion or clipping on a 16 or 32 Bit S7-300 Input/Output module. The wiring is very low. Through the use of prefabricated system cables, connection errors are excluded. Therefore the interface modules/transfer modules can be connected fast & safe to the S7 PLC.

FastPlug - Frontadapter for S7-300 modules

The S7-300 front connectors of Systeme Helmholz GmbH permit fast and simple connection of sensors and actuators on the input/output modules of Systeme Helmholz GmbH or other manufacturers.

S7-300 Front Connector

The S7-300 front connectors of Systeme Helmholz GmbH permit fast and simple connection of sensors and actuators on the IO module