V.35/10 Base-T to E1 Converter GVE-Tplus

*For V.35 interface,DCE and DTE mode are optional

*For E1 interface,75ohm(unbalanced) and 120ohm(balanced) available and auto-negotiation

*Provide local,diagnostic and remote loop back test

*Support intenal clock,E1 recovery clock or V.35 line clock

*Support remote bandwidth control,and remote loop back under framed mode

*CRC/non-CRC auto-negotiation on E1 interface

*Frame mode support PCM30/PCM31

*10Base-T LAN Interface on RJ-45 connector and MDI/MDI-X auto-crossover

*Ethernet port 10Mbps, Full/Half Duplex mode compatible

*Framed(N*64Kbps) and unframed(2.048Mbps) optional,support continuous and discontinuous timeslots setting

*Standalone and chassis module available,support hot-swap

*Fully compatible with IEEE 802.3 and Ethernet Standards

*Support ITU-T V.35, G.703, G.704, G.823

*Interface conversion between E1 and V.35,E1 and Ethernet

Features

GVE-Tplus Series gives the interface conversion between G.703 E1 and V.35.This device provides an economical digital access solution foe E1 and Fractional E1 network services.With a adapter cable, the Device can link to other DTE Device,such as router,at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame,using only the required number of timeslots.Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.GVE-Tplus Series is widely used in communication network,both in WAN and LAN connection field.

V.35/10Base-T to E1 Protocol Converter

V.35 over E1 converter
10Base-T to E1 Protocol Converter
E1/BNC/RJ45 optional