Generator ATS/Automatic Transfer Switches
Product Details
4.10 Maintenance must not be conducted before the Gen-set is disengaged from the system.
4.9 The battery negative terminal must be disconnected immediately when the Gen-set is disengaged from the system, in order to avoid fault operations.
4.8 The Gen-set switch should be on OFF position (NO. 5) after the Gen-set is connected to the system.
4.7 The 1st debugging or disengaging from the system should be performed by licensed electricians or skilled technical worker. Do not allow unskilled operator to conduct trial operation in order to avoid unexpected accidents.
4.6 In case an emergency stop or disengage from the system is required, turn the MODE switch (NO. 3) to MANUAL position and switch off the air circuit breaker (NO. 1). Thus the Gen-set disengages from the system and enters into the manual operation status.
4.5 The Gen-set maximum load should not exceed 5kW; some surpluses are recommended.
4.4 The sections of lead wires must be greater than 2.5 mm2~4mm2. The longer the wire is, the bigger is the section.
4.3 For ambient requirements, please refer to Diesel Generator Operation and Maintenance Manual.
4.2 The Gen-set is to be located in a comparatively isolated place to prevent it from fault operation by casual access and touch of personnel and livestock.
4.1 The Gen-set should be placed on a spacious area separately with good ventilation.
4 CAUTIONS
When the municipal network power input (NO. 4) is manually cut off, the Gen-set is able to switch on to operation immediately as per any requirements. When manually connected to the external power (NO. 4), the Gen-set will stop running according to advance programmes.
3.6 Ensure all the incoming and outgoing lead wires are correct and turn the MODE switch (NO. 3) to the AUTOMATIC position. Thus the Gen-set enters automatic control status of the ATS system.
3.5 Switch the air circuit breaker (NO. 1) to the ON position.
3.4 The lead wire section should be
This product mainly applies as a standby power supply.It is highly automatic and intelligentize.
- Output Type:AC Three Phase
- color:Yellow
- Model Number:JYWG
- Brand Name:Hanjing
- Operating temperature:-15~+60C
- Rated Voltage:AC110~380V
- Rated Power:5KW
- Frequency:50~60HZ
- Place of Origin:Fujian China (Mainland)
- Country:China (Mainland)
- telephone:0086-591-88079907
| Delivery Time: | 7~30 days |
| Package: | Box Packing |
| Supply Ability: | 1000 Set/Sets per Week |
| Minimum Order Quantity: | 1 Set/Sets |
| Payment Terms: | L/C,T/T,Western Union |
| Port: | Fuzhou Port |
| color: | Yellow |
| Model Number: | JYWG |
| Brand Name: | Hanjing |
| Operating temperature: | -15~+60C |
| Rated Voltage: | AC110~380V |
| Rated Power: | 5KW |
| Frequency: | 50~60HZ |
| Place of Origin: | Fujian China (Mainland) |
Send inquiry / quota request to Generator ATS/Automatic Transfer Switches
Relate products of Generator ATS/Automatic Transfer Switches
The Cosuper 2000 watt pure sine inverter charger with transfer switch can be used for multiple applications when going off-grid, such as RVs, Caravans, Camping trips and more. A power inverter is an electrical device that converts the DC power stored in a battery into standard ...
\"China supply A/B small machine switching valve filter SGF.BH-H30X3F-C DR0030D003BN/HC for turbine generator Deyang YOYIK is a strong technical force, first-class product quality, brand reputable large-scale mechanical and electrical equipment Limited. Company products covered ...
Come From DEYANG DONGFANG YOYIK ENGNIEERING CO
Vacuum Generator Pisco VXE07 J1301168/J9061046C/J6707009A Samsung CP Pressure Switch J7000773 SPROCKET ASS\'Y J8100120A SPROCKET ASS\'Y J8100123A TAPE GUIDE ASS\'Y J7000775 PUSHER LEVER ASS\'Y J7000776 SHUTTER LEVER ASS\'Y J7000777 RACHET PUSHER ASS\'Y J7000884 REEL WIND CLANK ...
Come From Jinchen Electric Technology Co,.Ltd
