Invitation to visit our factory
1. If you are interested in our products we sincerely invite you to take a visit of our factory when you are in China.
2. Our factory locates in Foshan City, which is famous for its ceramics, is just 45 minutes away from Guangzhou, and 35 minutes away from Canton Fair.
3. When you come to Guangzhou or Cantonfair, we can send cars to pick you up and take you to our factory.
4. In the factory we can discuss more about the cooperation and we will listen to your requirements.
Now Shunhengxin Diesel Gensets Co., Ltd. Product line covers
1. Open type gensets.
2. Silent type gensets.
3. Trailer mounted gensets.
4. Fuel tanks
5. Industrial Silencers & other genset accessories.
Introduction of Shunhengxin Diesel Gensets Co., Ltd
Shunhengxin Diesel Gensets Co., Ltd has more than a decades experience in manufacturing and maintenance of generator sets.We mainly manufacture Cummins, Deutz and Perkins powered gensets which are
all made in China keeps the genset cost much lower than the US or EU or the Japan cost, since the design and all the materials are the same with original factories, the quality remains the almost
the same as the original factories.
OEM Service
Shunhengxin Diesel Gensets Co., Ltd. Can provide professional OEM Service for customers.
1. Unique design and manufacture of generator according to customers requirement.
2. Customer logo printing or painting on the genset.
3. Installation and Operation manual neutral or headings can be design according to customer requirement.
4. Full warranty cover to support the customers customers.
1.6 The completed and individually tested engine and generator shall be assembled onto the baseplate with all auxiliaries, instruments and controls for a complete test of the generator set.
1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.
1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction athe manufacturers cost.
1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchasers satisfaction and tests shall be repeated.
1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
1.1 Each engine shall be tested at manufacturers workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
1 GENERAL
INSPECTION AND TEST
6.7 Relative Drawings and Diagrams
6.6 Factory Acceptant Test Report
6.5 Alternator Manual and Quality File
6.4 Engine Manual and Quality File
6.3 Generator Set Control Panel Manual
6.2 Generator Set Operation and Maintenance Manual
6.1 Generator Set Installation Manual
5.1 Common base plate
6. DOCUMENTS
4.1 Local automatic control panel
5. BASEPLATE
3.2 Coupling Guard
4. CONTROL PANEL
3.1 Coupling
2.2 All interconnecting piping, cablings, instruments, valves and settings, etc.
3. COUPLINGS AND GUARD
2.1 Generator, which includes exciter, rectifier, AVR, shaft mounted fan if required.
SCOPE OF SUPPLY
1. DIESEL ENGINE
1.1 Engine which includes wet type cylinder, direct injection combustion chamber, exhaust turbocharger, water cooling, electronic governor, etc.
1.2 Fuel system, which includes, fuel pump, strainers or filters, etc.
1.3 Air intake and exhaust system, which includes air filter, exhaust silencer, bellow, all intake and exhaust piping, cablings, instruments, valves and settings, etc.
1.4 Cooling system, which includes radiator with water level alarm and indicator, thermostatic switch, thermostatic heater, engine shaft mounted fan, all interconnecting piping, cablings,
instruments, valves and settings, etc.
1.5 Lubricating system includes pumps, oil sumps, oil strainers and filters, all interconnecting piping, instruments, valves and settings, etc.
1.6 Starting system, which includes 2 sets of batteries, a set of AC charger, and interconnecting piping, cablings, instrument, valves and settings, etc.
2. AC SYNCHRONOUS GENERATOR
ISO8528; ISO1105; ISO3046; GB/T2820; GB755; BS5000; NEMAMG-22; YD/T502
Manufacturing Standards:
Single Phase Voltage Available: 100-250V
4. Three Phase Voltage Available: 208V / 220V / 230V / 240V / 380V / 390V / 400V / 415V / 440V / 460V / 480V
3. Speed: 1500/1800rpm
2. 3 Phase 4 Wire or 1 Phase 2 Wire
1. Frequency: 50/60Hz
Special Specifications
8) Starting by Battery
7) AVR regulation
6) IP22 Protection
5) Self-Excited
4) Brushless
3) Insulation: Class H
2) 3 Phase 4 Wire
1) Power Factor: 0.8 Lagging
Electrical Specifications of electrical generator
5) Small,compact structure,steady performance
4) Prime Power:25KW,standby power:30KW
3) Alternator:Engga/Marathon/Stamford
2) Engine Model:1003G (Tianjin Perkins)
1) Model:SPE30
Perkins Diesel Generator
Perkins Diesel Generator
1)Engine: Lovol Series 1003G
2)Prime Power:25KW,standby power:30KW
3)Best quality,competitive price
Delivery Time: | 20days |
Package: | plastic sheet or wooden case |
Supply Ability: | 96 Set/Sets per Month |
Minimum Order Quantity: | 1 Set/Sets |
Payment Terms: | L/C,D/P,T/T |
Port: | SHUNDE CHINA |
Rated Voltage: | 400/230V |
Rated Power: | 25KW |
Frequency: | 50Hz |
Speed: | 1500RPM |
Output Type: | AC Three Phase |
Model Number: | SPE30 |
Brand Name: | SHX |
Place of Origin: | Guangdong China (Mainland) |
CNDIP is your trusted partner in supplying highest quality ,best price for diesel engine spare parts. With thousands of parts in stock, we have what you are looking for Material Type: High-speed Steel Our Advantages 1. High quality,Best price. 2. Timely delivery; Within 7 days ...
Come From DIP DIESEL INJECTION PARTS PLANTS
solenoid valve cat 320d solenoid valve for diesel generator Sandy(JUL) China Lutong Parts Plant whatsapp/tel:008618659458099 #solenoid valve cat 320d solenoid valve for diesel generator# #solenoid valve cat 320d# #solenoid valve for diesel generator# #solenoid valve cat ...
Come From china lutong parts supplier
perkins 4 cylinder diesel injectors for 1451-V3340F322T bosch tool for common rail injection pump Sandy(AL) China Lutong Parts Plant whatsapp/tel:008618659458099 Warranty:1 year Quality:100% Tested Condition:Brand New Body Material: Steel Certification: ISO9001a Cylinder: ...
Come From china lutong parts supplier