1000 kW Cummins Powered Generator Power Module

5510 Metering
The 5510 module provides metering via the LCD display with the following instrumentation displays, accessed via the LCD DISPLAY SCROLL push buttons:
- Generator Volts L1-N, L2-N, L3-N
- Generator Volts L1-L2, L2-L3, L3-L1
- Generator Amps L1, L2, L3
- Generator Frequency Hz
- Engine Speed RPM
- Engine Oil Pressure
- Fuel Level %
- Engine Temperature
- Plant Battery Volts
- Engine Hours Run
- Generator kVA
- Generator kW

5510 Microprocessor Control
The module features 16 bit microprocessor control and a comprehensive list of timers and pre-configured sequences.  This allows demanding specifications to be achieved.  Configurable expansion facilities are also provided.

5510 Easy Pushbutton Control
Operation of the module is via pushbutton controls (with security locking facility) mounted on the front panel with STOP/RESET, AUTO, MANUAL, and START buttons.  The first three buttons feature LED selected indications.  Further buttons provide LCD DISPLAY SCROLL and EVENT LOG VIEW functions.

It is possible to monitor operation of the system either locally or remotely.  (Optional: remote communications output versions only.)

Deep Sea Control Panel 5510
Model 5510 is an Automatic Engine Control Module.  The module is used to automatically start and stop the engine, indicating the operational status and fault conditions, automatically shutting down the engine and indicating an engine failure by means of an LCD display and an appropriate flashing LED on the front panel.  Selected timers and alarms can be altered by the customer from the front panel.  Alterations to the system are made using the 810 interface and a PC.  This interface also provides real-time diagnostic facilities.

Includes 1200 Gal Base Tank
- Inner tank fabricated with 10 gauge steel
- Outer tank fabricated with 7 gauge steel, including top and bottom
- 4  2" NPT fittings, including two 1" NPT engine supply and return dip tubes, fuel fill, normal vent, direct reading mechanical fuel gauge, one additional fitting for standard low fuel switch
- Outer containment area is permanently vented through manufacturers
- One NPT basin drain/fuel in basin switch is provided as standard equipment
- All tanks are painted satin black unless specified
- Empty Weight: 5500 Lbs
- Sub-base Dimension: 96" x 54" x 72"

*Batteries, Battery Rack, and Cables Not Included

   Trailer
-Length: 96"
-Tandem: 54"
-Max Rear Hit: 48"
-GVWR: 65,000
-Weight: 6500+/-2%

ENCLOSURE
- High cube container (One time used / refurbished like New)
- Personnel entrance door with cam lock latch system
- Dual louvered air intake grills
- Sound attenuating interior insulation (silver) with stainless trim
- Mounted and plumbed 1,200 gallon double wall fuel tank
- Mounted mufflers with installed custom heat blankets
- Internal updraft radiator discharge scoop (radiator discharge air goes out the top for quiet operation)
- NEMA 1 cabinet with mounted mainline circuit breaker
- Connection lugs
- Exterior door for wire entrance into the foot of the breaker box
- Imron paint
- Steel diamond plate floor, painted grey                  
- 12 volt DC Interior lighting    

• New
• 1 Year / 1,000 Hour Limited Warranty (Whichever comes first)
• 60 Hertz
• Digital Control Panel
• Electric Start
• Mainline Circuit Breaker
• Rental Grade Units
• Serviced and Loadbank Tested
• Stamford Newage Generator End
• GeneratorType: Diesel
• 3 Phase

• 1000 KW/ 60Hz
  480 volt/3Phase
  Cummins QST30G4 Engine
  Stamford Newage HCI634J Alternator
  Battery Charging Alternator
  Mainline Circuit Breaker
  Side Mounted Control Panel: DSE5210
  Silencer and Flex connector
  40' ISO Sound Attenuated Enclosure
  Triple Axle D.O.T. Approved Chassis
  *Batteries, Battery Rack, and Cables Not Included
  Option: Deepsea 5510 Paralelling Control Panel w/ Motorized Breaker - for an additional fee