300-495 kVA DIESEL GENERATOR SETS

300-495 kVA DIESEL GENERATOR SETS Design Features
ENGINE
l Heavy duty diesel engine.
l Four stroke, water cooled, turbocharged
l Direct injection fuel system.
l 12/24 V D.C. starter and charge alternator.
l Replaceable fuel filter, oil filter and dry element air filter.
l Cooling radiator and fan.
l Starter battery (with lead acid) including Rack and Cables
l Flexible fuel connection hoses and manual oil sump drain valve.
l Indutrial capacity exhaust silencer and steel bellows.
l Fuel stop solenoid
l Fuel pump
l Jacket water heater (at automatic models).
l Operation manuals and circuit diagram documents.
ALTERNATOR
l Brushless, single bearing system, flexile disc, 4 poles.
l Insulation class H
l Temperature class H
l Standard degree of protection IP21
l Self-exciting and self-regulating.
l Impregnation with tropiclised epoxy varnish.
l Solid stade Automatic Voltage Regulator.
CHASSIS
l The complete generator set is mounted as whole on a heavy-duty fabricated,
steel base frame.
l Antivibration pads are fixed between the engine/alternator feet and the base frame.
l Base frame design incorporates an integral fuel tank.
l The generating set can be liefted or carefully pushed/pulled by the base frame.
l Dial type fuel gauge and drain plug on the fuel tank.
l Forklift pockets within base frame (up to 500kVA).
CANOPY
l All canopy parts are designed with modular principles.
l Without welding assembly.
l Doors on each side.
l All metal canopy parts are painted by electrostatic polyester powder paint.
l Exhaust selincer is protected against environment influences.
l Thermally insulated engine exhaust system.
l Emergency stop push button is installed outside of canopy.
l Easy lifting and moving.
l Easy maintenance and operation.
CONTROL SYSTEM
l Control, supervision and protection panel is mounted on the genset base frame.
The control panel is equipped as follows:
1. Auto, Mains Failure Control Panel:
Panel euipment:
Control with AMF module
Static battery charger
Emergency stop push button
a) Generating set control module features:
The module is used to monitor a mains supply and automatically start a
standby generating set.
Micro-processor based design
Automatic control of mains and generator contactors
Monitors engine performance and AC power output
LED alarm indication
Front panel configuration of timers and alarm trip points
Easy push button control
STOP/RESET - MANUAL - AUTO - TEST - START
b) Metering via LED display:
Generator Volts (L-L / L-N)
Generator Ampere (L1,L2,L3)
Generator Frequency (Hz)
Engine hours run
Engine oil pressure (PSI-Bar)
Engine temperature ( C)
Plant battery volts
Mains Volts (Ph-Ph/Ph-N)
c) Alarms:
Over and Under Speed -
Start and Stop Failure -
Over Current -
Under / Over Generator Voltage
Low and High Battery Volt
Charge fall
Low Oil Pressure
Emergency stop
High engine temperature
c) LED Indications:
Mains available
Generator available
Mains on load
Generator on load

try diesel generator set    to get through more products