Generator set/diesel generator

Please contact us for more information about our product.

Invitation to visit our factory
1. If you are interested in our products we sincerely invite you to take a visit of our factory when you are in China.
2. Our factory locates in Foshan City, which is famous for its ceramics, is just 45 minutes away from Guangzhou, and 35 minutes away from Cantonfair.
3. When you come to Guangzhou or Cantonfair, we can send cars to pick you up and take you to our factory.
4. In the factory we can discuss more about the cooperation and we will listen to your requirements.

Now Shunhengxin Diesel Gensets Co., Ltd. Product line covers
1. Open type gensets.
2. Silent type gensets.
3. Trailer mounted gensets.
4. Fuel tanks
5. Industrial Silencers & other genset accessories.

Introduction of Shunhengxin Diesel Gensets Co., Ltd.
Shunhengxin Diesel Gensets Co., Ltd has more than a decades experience in manufacturing and maintenance of generator sets.
We mainly manufacture Cummins, Deutz and Perkins powered gensets which are all made in China keeps the genset cost much lower than the US or EU or the Japan cost, since the design and all the materials are the same with original factories, the quality remains the almost the same as the original factories.

1.6 The completed and individually tested engine and generator shall be assembled onto the baseplate with all auxiliaries, instruments and controls for a complete test of the generator set.
OEM Service
Shunhengxin Diesel Gensets Co., Ltd. Can provide professional OEM Service for customers.
1. Unique design and manufacture of generator according to customers requirement.
2. Customer logo printing or painting on the genset.
3. Installation and Operation manual neutral or headings can be design according to customer requirement.
4.  Full warranty cover to support the customers. 

1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.

1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction athe manufacturers cost.

1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchasers satisfaction and tests shall be repeated.

1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.

1.1 Each engine shall be tested at manufacturers workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.

1 GENERAL

 6.7 Relative Drawings and Diagrams
INSPECTION AND TEST

 6.6 Factory Acceptant Test Report

 6.5 Alternator Manual and Quality File

 6.4 Engine Manual and Quality File

 6.3 Generator Set Control Panel Manual

 6.2 Generator Set Operation and Maintenance Manual

 6.1 Generator Set Installation Manual

 5.1 Common base plate
6. DOCUMENTS

 4.1 Local automatic control panel
5. BASEPLATE

 3.2 Coupling Guard
4. CONTROL PANEL

 3.1 Coupling

 2.2 All interconnecting piping, cablings, instruments, valves and settings, etc.
3. COUPLINGS AND GUARD

 2.1 Generator, which includes exciter, rectifier, AVR, shaft mounted fan if required.

ISO8528; ISO1105; ISO3046; GB/T2820; GB755; BS5000; NEMAMG-22; YD/T502
SCOPE OF SUPPLY
1. DIESEL ENGINE
1.1 Engine which includes wet type cylinder, direct injection combustion chamber, exhaust turbocharger, water cooling, electronic governor, etc.
1.2 Fuel system, which includes, fuel pump, strainers or filters, etc.
1.3 Air intake and exhaust system, which includes air filter, exhaust silencer, bellow, all intake and exhaust piping, cablings, instruments, valves and settings, etc.
1.4 Cooling system, which includes radiator with water level alarm and indicator, thermostatic switch, thermostatic heater, engine shaft mounted fan, all interconnecting piping, cablings, instruments, valves and settings, etc.
1.5 Lubricating system includes pumps, oil sumps, oil strainers and filters, all interconnecting piping, instruments, valves and settings, etc.
1.6 Starting system, which includes 2 sets of batteries, a set of AC charger, and interconnecting piping, cablings, instrument, valves and settings, etc.
2. AC SYNCHRONOUS GENERATOR

Single Phase Voltage Available: 100-250V
Manufacturing Standards

4. Three Phase Voltage Available: 208V / 220V / 230V / 240V / 380V / 390V / 400V / 415V / 440V / 460V / 480V

3. Speed: 1500/1800rpm

2. 3 Phase 4 Wire or 1 Phase 2 Wire

1. Frequency: 50/60Hz

8) Starting by Battery
Special Specifications

7) AVR regulation

6) IP23 Protection

5) Self-Exited

4) Brushless

3) Insulation: Class H

2) 3 Phase 4 Wire

1) Power Factor: 0.8 Lagging

Electrical Specifications of power generator

6) Small,compact structure,beautiful appearance

5) Good power-weight ratio

4) Low exhaust gas,low fuel consumption

3) Prime Power:40KW/50KVA,Standby Power:44KW/55KVA

2) Engine Model:1004G (Tianjin Perkins)

1) Model: SPE44

power generator.

  Generator set /diesel generator/Power generator

Generator set
1)Diesel Engine: Lovol Series 1004G
2)Prime Power: 40KW/50KVA
3)ISO9001:2000
Hot price and best service