Multi Loose Tube Fiber Optic Cables

All the fiber containing tubes are placed in concentric layers around the central member; through the control of the twist length, the fiber cable can achieve better pulling load and operating temperature. Tube Materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the tube can provide water protection for the fibers inside the tube. Central Member, which is usually either made of dielectric FRP, or solid/ stranded steel coated with polyethylene, re placed at the centre of the cables.

Product Highlights:

Twist (Torsion Length): 125 x Overall Diameter

Long Term Installation: 10 x Overall Diameter (Non Armored); 20 x Overall Diameter (Armored)

Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter

Maximum Pulling Load: 1500-2700 N (Short Term Installation); 900-1500N (Long Term Installation)

Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)

Technical Parameters:

The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.

Construction:

Installed in duct, self supporting (Figure 8 self supporting or ADSS All dielectric self supporting) and direct burial (with armoring).

Installations:

Long distance outside telephone, CATV, Data, communications.

try fiber optic cable    to get through more products